d16z6 clutch/ flywheel
#1
Registered member
Thread Starter
Join Date: Sep 2008
Location: SVA
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
d16z6 clutch/ flywheel
iv got a z6 vtec with a built head (valves, retainers, and a valve job)
and my stock clutch took a shit fast ( it was about 2 months old )
if i go stage 2 clutch will i need another flywheel?
and my stock clutch took a shit fast ( it was about 2 months old )
if i go stage 2 clutch will i need another flywheel?
#5
Sparkle Motion
Join Date: Jun 2006
Location: Va Beach
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: d16z6 clutch/ flywheel
Dont go ebay. Spend the extra 150 or so on a ACT, Exedy, etc...
It is like 35-40 to resurface the flywheel, so get that done at least, if not a lightened flywheel never hurts.
It is like 35-40 to resurface the flywheel, so get that done at least, if not a lightened flywheel never hurts.
#6
Registered member
Thread Starter
Join Date: Sep 2008
Location: SVA
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
Re: d16z6 clutch/ flywheel
iv only got 125 to spend i can probably get a little more but im broke until i get a job and i need a car to get the job
#7
Registered member
Thread Starter
Join Date: Sep 2008
Location: SVA
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
Re: d16z6 clutch/ flywheel
anyone ever used sachs clutches?
http://www.autopartswarehouse.com/de...S2KF70203.html
http://www.autopartswarehouse.com/de...S2KF70203.html
#9
Zombies found Waldo
Join Date: Mar 2006
Location: P-town
Posts: 5,955
Likes: 0
Received 0 Likes
on
0 Posts
Re: d16z6 clutch/ flywheel
And depending on where you go for the re-surfacing, I only spent $25 for Doug's Machine Shop in Portsmouth to do it. brought it in at 10, they had it done before lunch. Though I wouldn't recommend any other work to be done there besides that.