D16a1 into 91 civic cx hatch
#1
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
D16a1 into 91 civic cx hatch
Hey guys, I got a full D16a1 swap for cheap. I have noticed a few different things on the regular d15, and the d16. This motor I believe is from a 87 integra. The wiring looks to be ok, just wondering about everything else. I know the transmission mounts up differently. So i'm going to use my cx tranny/clutch assy. Also anybody have a good site for the MPFI conversion. I have done it a couple times but it's been a while. Let me know guys.
#2
#4
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16a1 into 91 civic cx hatch
Hey guys, thanks. The Right side bracket for the engine mount is not there on my engine. What can I use? Could I use a 5th gen zc? or the 4th sohc? Let me know.
#5
Re: D16a1 into 91 civic cx hatch
this is going in an ef chasis or eg? im confused because you said 91 cx and honda didnt make the cx until 92 which would be an eg...anyways i used all my exsisting motor mounts when i did mine i just bought new ones
#6
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16a1 into 91 civic cx hatch
Well it is a cx, i'm in canada, so maybe it's different. my buddy even has a cx hatch like me to, it's an ef for sure. But I'm not talking about the motor mount, i'm talking about the bracket the mount bolts onto. It's right on the front of the engine, the mount kinda goes into the timing belt cover, if you know what I mean. Well there is no bracket for the mount there. So should I try and use the one from the sohc? I don't wana try something and it not work when i try to put the engine in and mount it up, like it not line up properly. Let me know man.
#9
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16a1 into 91 civic cx hatch
Hey guys i just wanted to be sure about what plugs are what. So there are two black ones and 1 white plug. The two black ones are different sizes. So what plugs are a, b, and c. Also what are the numbers, like when i am looking at the plug how it goes to the ecu. what numbers are what and how do they correspond, does it go:
1234567
89101112
or: 1357
2468
Let me know guys, I am going to do all the wiring tomorrow as I have the whole day off, Please try to give me good detail.
1234567
89101112
or: 1357
2468
Let me know guys, I am going to do all the wiring tomorrow as I have the whole day off, Please try to give me good detail.
Thread
Thread Starter
Forum
Replies
Last Post