Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

d15 vtec

Thread Tools
 
Old Nov 10, 2002 | 09:55 AM
  #1  
i08SirDead's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 15
Likes: 0
From: Va Beach
i08SirDead is an unknown quantity at this point
Default d15 vtec

didnt honda make a 92-95 VX with d15 vtec?
Old Nov 12, 2002 | 07:37 AM
  #2  
mini-meturbodx's Avatar
registeredbeerdrinkr
 
Joined: Nov 2002
Posts: 172
Likes: 0
From: Beaufort, SC
mini-meturbodx is an unknown quantity at this point
Default

yep
economy vtec
Old Nov 12, 2002 | 11:45 AM
  #3  
CHAHONDA's Avatar
corona connessuer
 
Joined: Nov 2002
Posts: 3,425
Likes: 0
From: GUAM
CHAHONDA CHAHONDA CHAHONDA CHAHONDA CHAHONDA CHAHONDA CHAHONDA CHAHONDA CHAHONDA CHAHONDA CHAHONDA
Default

i just put together one of those motors! i used a 92 civic cx 1.5 bottom end and put a 98 1.6 vtec head and intake on it. i used a 97 ex tranny also for the better gearing. the car is much faster! the cx 1.5 lower end has flat top pistons, while the 1.6 vtec engines have dished pistons with a 9.6 cr
i figure the flat tops would yeild a 10-10.2 cr???????

it took me a little bit of playing with the timing to get it to stop pinging. runs real good now!
Old Nov 13, 2002 | 04:28 AM
  #4  
mini-meturbodx's Avatar
registeredbeerdrinkr
 
Joined: Nov 2002
Posts: 172
Likes: 0
From: Beaufort, SC
mini-meturbodx is an unknown quantity at this point
Default

you might through a rod bearing or rod through the block
very weak rods
I think cr is higher though
Old Nov 13, 2002 | 06:12 PM
  #5  
ACRX's Avatar
Summa Cum again.
 
Joined: Nov 2002
Posts: 2
Likes: 0
From: Va Beach
ACRX is an unknown quantity at this point
Default

are you running an automatic or 5spd? I've found on several sites the fact that the auto cannot sustain more than 10-20 hp over stock. It will last about 2 months with the 50+ hp, or about 6 mos with some internal parts upgrades and cooling. Also, mini-meturbodx is right. It does have some very weak rods.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PAWESOME
Parts ARCHIVE
1
Mar 23, 2008 11:54 PM
zc_god
Parts ARCHIVE
21
Jan 31, 2008 05:23 AM




All times are GMT -8. The time now is 08:27 AM.