Well i finally got around to getting my motor back together and cylinders 2 and 3 are not firing. Now it does have compression and it does have spark and fuel,but its not firing on those two cylinders.It did this on my old head which had 2 bent valves on cylinder 3,so i got another head and just put my rocker arm and cam assembly in this head but im having no luck.

Anyone have any ideas?? Its driving me crazy and i just want it finished.

 

check valve adjustment

 

Would that really cause those cylinders to not run.

 

Fixed,did compression test,all 4 had 190 across the board,pulled off my cap and my ignition coil was friedddddd.