crx intake
03-01-2004, 06:52 PM
#2
89silude
Join Date: Oct 2003
Location: Roanoke, VA
Posts: 1,765
Likes: 0
Received 0 Likes
on
0 Posts
Re: crx intake
maybe if you have a mass air flow sensor on your stock intake. then you have to get that put onto the new one. that's the only thing i can think of that will make a CEL go off.
03-01-2004, 07:29 PM
#4
Dont Be Scared Homie
Join Date: May 2003
Location: Suffolk, VA
Posts: 2,777
Likes: 0
Received 0 Likes
on
0 Posts
Re: crx intake
if you have a MAF you need a MAF adapter so you can put a filter on. and yes you need a filter, unless you want dirt to get into your engine.
Last edited by Neo Xian Wu; 03-01-2004 at 07:32 PM.
03-02-2004, 08:22 AM
#5
89silude
Join Date: Oct 2003
Location: Roanoke, VA
Posts: 1,765
Likes: 0
Received 0 Likes
on
0 Posts
Re: crx intake
it's better not to put a breather on there. (ppl will fight to death that it don't matter but each to your own) the intake should come w/ a hose that will connect from the VC to the intake.
03-02-2004, 09:41 AM
#7
Dont Be Scared Homie
Join Date: May 2003
Location: Suffolk, VA
Posts: 2,777
Likes: 0
Received 0 Likes
on
0 Posts
Re: crx intake
Originally Posted by 89silude
it's better not to put a breather on there. (ppl will fight to death that it don't matter but each to your own) the intake should come w/ a hose that will connect from the VC to the intake.
03-02-2004, 11:19 AM
#8
89silude
Join Date: Oct 2003
Location: Roanoke, VA
Posts: 1,765
Likes: 0
Received 0 Likes
on
0 Posts
Re: crx intake
^^^ yeah, as long as you have it hooked up to the intake you don't need one. other wise you do NEED to put one on there. IMO just keep it hooked up to the intake.
03-02-2004, 11:36 AM
#9
Registered Member
Thread Starter
Join Date: Dec 2003
Location: 757
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
Re: crx intake
i want to do this but im just not gonna have any piping so , i do have to have the little air breather on that hose that was connected to the original airbox tude correct?