Crank Angle Sensor
#4
1st timmer
Thread Starter
Join Date: Feb 2004
Location: Bad News (NN)
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crank Angle Sensor
Ok Thanks But I Need To Know Where Exactly. The Haynes Manual Says It's Part Of The Distibutor Assembly But The Book Is For A 90-93 And The 93's Are Different And My Friend Said That The Book's Quote Is For The 92-93's So I Need To Know Where It's At On My 90.
#5
The Pro to call.
Join Date: Jul 2003
Location: under cars.
Posts: 6,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crank Angle Sensor
its in the dist.....
just save yourself the time and get another dist....either a good reman unit or a new one. believe me.....you will thank yourself for doing that.....
just save yourself the time and get another dist....either a good reman unit or a new one. believe me.....you will thank yourself for doing that.....
#6
WHO ELSE BOWLS?
Join Date: Jun 2003
Location: VIRGINIA BEACH, VA
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crank Angle Sensor
Originally Posted by todb84
does anyone know where the crank angle sensor is on a 90 accord? if so how do i replace it?
its part of the lower sub assy for the dist. hope this helps
#9
The Pro to call.
Join Date: Jul 2003
Location: under cars.
Posts: 6,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crank Angle Sensor
ok, you asked where it was, and how to change it...
then you ask for more help?
what more do you want to know? i assume you are asking this because you are getting a CAS code?
more info would be helpful to those that try to help ya
and i have installed a few reman units (mainly cardone) that were bad out of the box....
backprobe the connector and check the output of the CAS with a digital labscope.....that way you can see if it has a shitty pattern, or if it doenst have the correct sweep, etc.....
then you ask for more help?
what more do you want to know? i assume you are asking this because you are getting a CAS code?
more info would be helpful to those that try to help ya
and i have installed a few reman units (mainly cardone) that were bad out of the box....
backprobe the connector and check the output of the CAS with a digital labscope.....that way you can see if it has a shitty pattern, or if it doenst have the correct sweep, etc.....
#10
Re: Crank Angle Sensor
Originally Posted by fc735
backprobe the connector and check the output of the CAS with a digital labscope.....that way you can see if it has a shitty pattern, or if it doenst have the correct sweep, etc.....
haha he didnt know where it was or how to replace it... ya think he's gonna have a labscope laying around? =]