I just put a poor man type r in my car. I went to start it and did a cpmpression test. It was 45 pounds on all cylinders. What could the problem be

 

cam timing

 

How do I time adjustable buddy club cam gears

 

Follow the instructions in the other thread you started about TIMING. Set the cam gears to zero, or reinstall the stock cam gears until you figure out what the problem is.


Here's a link to your own thread if you've forgotten (you made it last Friday):

https://www.vadriven.com/forums/tech-talk-9/timing-396439/

 

Ok so I have done a compression test and all cylinders vary from 30 to 85 psi. What could cause that

 

Rings, cracked sleeve, could be alot of things.

 

How would I find out which option it is

 

Open that fucker up. If the pressure is that much off its time to pull the motor man.

 

exactly, doesn't matter why it's so low, it just means you need to pull it and rebuild it, or replace it.

 

just curious as to what motor...but as they said...its junk basically...either rebuild or replace