car wont start
Bitches get Stitches
Joined: Mar 2003
Posts: 3,959
Likes: 0
From: Chesapeake
Re: car wont start
Originally Posted by fc735
ok, well do what everyone else says, change a bunch of parts.
THEN when thats not it, pay again to have someone that knows what they are doing diagnose it. sometimes, being cheap doesnt pay off. in fact, almost every time it doesnt.
THEN when thats not it, pay again to have someone that knows what they are doing diagnose it. sometimes, being cheap doesnt pay off. in fact, almost every time it doesnt.
JAY SPEC
Joined: Sep 2003
Posts: 3,170
Likes: 0
From: Chesapeake/ODU
Re: car wont start
Originally Posted by HateV8s
it makes lik a ddddd noise lik it wants to turnover and i did chek all my fuses
#2: diagnose a problem before replacing a part. it will save you lots of money in the end
check to make sure that nothing is lodged between your new lightweight flywheel and the inside of your transmissions bell housing. a improperly tightened flywheel bolt will sheer off and lodge it self between the flywheel and the housing. this will cause your engine to suddenly stop. ask me how i know....
Registered Member
Joined: Nov 2002
Posts: 127
Likes: 0
From: va beach
Re: car wont start
yo your problem sounds like it is you battery ground find it, and make sure it is grounded properly. i had the same problem outside of waffle house, i disconnected the ground cleaned it up and started my car. if this doesnt work take it to a shop.
corona connessuer
Joined: Nov 2002
Posts: 3,425
Likes: 0
From: GUAM
Re: car wont start
man i have a headache now from trying to comprehend this post 
where is the car located??? it's much easier to look at the car than it is to try and diagnose it on the internet
where is the car located??? it's much easier to look at the car than it is to try and diagnose it on the internet
Registered Member
Joined: Jan 2005
Posts: 2,098
Likes: 0
From: Chesapeake
Re: car wont start
Check your battery terminals... see if they are tight and properly connected. Also this could be the most retarded reason why it doesn't work, but find your starter. Check to see if any type of connection to the starter has come even SLIGHTLY loose.
