just use your ka lower harness. thats what i did and it worked out fine. just swap out the "speedo, reverse, and neutral sensors" from the ka tranny to ca tranny. dont worry about the 4thand 5th gear ka sensor plugs just leave them unpluged. the ka and ca starters have very different positive terminals, just swap the terminals. and for the knock/ detonation sensor "find pin 23 on the ecu and splice it into that wire using shielded wire" if you have the plug for it thats good if not you can solder directly into the knock sensor itself. everything else on the lower harness should be plug and play. i hope this was the info you were looking for if not let us know and well try to help.

wei

 

yea its that one plug..... and my lower harness got a lil cut up on the tear out.

 

bump

 

bump

 

I dont know what that plug does but it doesnt seem to matter, ive left it undone on many of my sohc to dohc swaps. So if nothing else I wouldnt concern yourself with that plug.

 

thanks still have no fuel...

 

looks like we are in the smae boat, but driftek is doing mine. It has fuel but no spark.

 

sucks so... anyone anyother ideas??

 

call driftek,7575476367,jeff said he may make a house call

 

jus to let yall know i got no loot.... im broke looking for a favor...