bent valves
#1
Banned
Thread Starter
Join Date: Jul 2005
Location: fredericksburg
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
bent valves
i bent the valves in my head a while ago, can i just replace the entire head and be able to get it running again? or is there other things that i have to do to it to make it run?
#4
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
Re: bent valves
Originally Posted by sohc-v
i bent the valves in my head a while ago, can i just replace the entire head and be able to get it running again? or is there other things that i have to do to it to make it run?
#7
Banned
Thread Starter
Join Date: Jul 2005
Location: fredericksburg
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: bent valves
Originally Posted by sucka306
if its a stock or near stock motor, i dont see why not. just check the bottom end when the head is off
#9
for alarms/rmt-strts
Join Date: Aug 2004
Location: pensacola, FML FL
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Re: bent valves
when his valve bent it caused a vortex where he spiraled into another dimension where every road is like new york and he hit a pothole and his bumper fell off...thats all i could come up with
#10
Re: bent valves
yea,.... he stoped and went to pick the bumper back up and once he did he spiraled back to richmond in this deminsion on the side of 95 and his bumper got hit by a 18 wheeler and shattered on impact.
what else usually needs to be replaced after the valves are bent, to make the head useful again.
what else usually needs to be replaced after the valves are bent, to make the head useful again.