b18c1 into a 92 civic hatch
#1
b18c1 into a 92 civic hatch
i was wonderin if anyone had put a integra gsr b18c1 into a 92 civic hatchback. if so what parts do i need other then the motor to make it fit? and will the wiring harness match up to the one on the civic? if you all would leave comments, tips or anwser the question it woul be appreciated
#2
i like prom.
Join Date: Nov 2002
Location: va beach
Posts: 7,089
Likes: 0
Received 0 Likes
on
0 Posts
#3
Banned
Join Date: Oct 2003
Location: ignoring NFC and his bitch's
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c1 into a 92 civic hatch
use a 92-95 ex sohc wiring harness. b18c1 motor, tranny, axles, obd-1 p72, obd-1 b-series mounts, and a 92 is already wired for vtec so your good. goes right in.
#4
Once Pooped a Hammer
Join Date: Jul 2003
Location: McLean, VA & Nashville, TN
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c1 into a 92 civic hatch
"its all been done... woo hoo hoo
its all been done... woo hoo hoo
its all been dooooooooneeeee befoooooreeee."
-barenaked ladies
of course its been done before, its the most common swap... try searching in the hybrid section of honda-tech
its all been done... woo hoo hoo
its all been dooooooooneeeee befoooooreeee."
-barenaked ladies
of course its been done before, its the most common swap... try searching in the hybrid section of honda-tech
#6
Registered member
Join Date: May 2004
Location: fredericksburg
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c1 into a 92 civic hatch
Originally Posted by abcxyz
use a 92-95 ex sohc wiring harness. b18c1 motor, tranny, axles, obd-1 p72, obd-1 b-series mounts, and a 92 is already wired for vtec so your good. goes right in.
Last edited by 7k rdlne; 05-14-2004 at 12:26 PM.
#7
Banned
Join Date: Oct 2003
Location: ignoring NFC and his bitch's
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c1 into a 92 civic hatch
Originally Posted by 7k rdlne
you will still have to wire the knock sensor , also you will have to wire the iab's also i would just use the gsr wire harness other wise you will have to modify the single cam one.
#8
Registered member
Join Date: May 2004
Location: fredericksburg
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c1 into a 92 civic hatch
Originally Posted by abcxyz
true, but oddly, when i had mine, i did not need to wire up the knock, and never did, but when i spun all my bearings and had knocks, vtec wouldn't kick in. i guess it either has another sensor or is already hooked up. i am still baffeled.
Thread
Thread Starter
Forum
Replies
Last Post