B&M Short Shifter Vibrations!
#1
the tag says it all.
Thread Starter
Join Date: Dec 2003
Location: Lexington Park, MD
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
B&M Short Shifter Vibrations!
I just installed a B&M short shifter on my '01 GSR and it virbrates and chatters very loud. I made sure to use all bushings and EVERYTHING has been tightened and re-tightened. It goes into gear well and drives fine. Does anybody have any suggestions, I am thinking about just taking it to a shop or putting the stock shifter back on.
#2
I have a 20 valve...
Join Date: Nov 2002
Location: Sunny San Diego, CA
Posts: 3,266
Likes: 0
Received 0 Likes
on
0 Posts
Re: B&M Short Shifter Vibrations!
there are 2 pieces to the shifter (well on honda's at least). one is the actual shifter, the other is a piece that looks like a balance that it connects to. That second piece goes into a bushing. Could it be possible that you pulled your first shift piece out and now the second balancing piece is causing it to rattle? Also, I've done this, I forgot to put the screws in the bottom of the shifter, and the damn thing would hit the exhaust, causing it to rattle. Just another thing to check.
Thread
Thread Starter
Forum
Replies
Last Post
1PhatLS
Engine / Exhaust / Drivetrain
17
01-20-2009 12:29 PM
Ick
Want to Buy / Trade ARCHIVE
0
05-18-2008 02:23 PM