if anyone has done it, i got a quick question about the wiring

it was explained on 240sx.org but the write up confuses me

on the back of the inhibitor switch, those 3 wires, they are supposed to be spliced together right?

 

IIRC, the wires you fuck wit from the inhibitor involve the reverse lights, and starter interlock. and you don't actually do anything at the inhibitor, you do all your work at the fuse box where the inhibitor switch plugs into the chassis harness.

the interlock wires splice together and the reverse lights get wired directly into the reverse switch.

this was a long time ago, and I built my own lower harness, so i didn't exactly follow the write-ups

 

this pic was provided on the write up. this is what confused me a little.
ok so im assuming the "reverse swtich" is the switch off the tranny righ?t


im a bit paranoid but i wanna make sure i get everything right lol