97_SI

i have a new problem now, everytime i turn my volume up, my fuse blows (fuse for the battery wire of amplifier), so i keep replacin it.. help.. what shud i do

uglyDC2

make sure u have the right fuse in place

the amperage should match whats on the amp itself

greekfreak

Check your ground and All connections

maddnotes

What size amp is it and what size wire do you have going to it?

Acrytet70

try the ground make sure its tight. also make sure your speakers have the right resistance.. if your at 1 ohm on a 2 ohm stable amp, thats why it blows!

97_SI

i have rockford 700s with 4 guage battery/ground. pushing a kicker 10" L5. the fuse is 30 amp keep blowin after i turn the volume loud..

97_SI

help anyone?

JayDM

This is exactly what's wrong with your fuses. Normally, you can play a lower load than your amp was designed for at low levels, but once you crank the volume or gain it will pop.

Don't just put a bigger fuse in before verifying your ohm load...that's how cars catch fire.

JayDM

Also, check ground...and make sure there are no stray strands of wire crossing (+)/(-)

BuddyClubCivic

Yep you need a class D mono amp.