96-00 rear disc conversion questions
02-03-2005, 03:54 PM
#1
I <3 BOOST
Thread Starter
Join Date: Jul 2003
Location: Del Rio, TX/Yorktown
Posts: 2,052
Likes: 0
Received 0 Likes
on
0 Posts
96-00 rear disc conversion questions
ok, im thinking about doing a rear disc conversion but i had a few questions. first of all let me state that my car is a non-ABS 98 Civic EX. first question: Can i use my stock LCAs or do i need ones from a teg/SI? second: Do i need a SI or Teg Prop. Valve? -if so, which one? third: Can i use my OEM brake lines? (the reason i ask is bc i have some Goodridge SS lines, but they're for 96-00 EXs, not the SIs). thanks in advance for the help!
02-03-2005, 04:37 PM
#2
cibic weetec
Join Date: Jan 2004
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Re: 96-00 rear disc conversion questions
first of all, you need to use your factory lca's. the teg ones will give you positive camber out the azz (like 30+ degrees 
)
second, you need to get a proportioning valve from either a 94-01 teg or 99-00 si.
third, you will need to use the disc brake lines.
also, you need to get the teg or si e-brake cables.
)second, you need to get a proportioning valve from either a 94-01 teg or 99-00 si.
third, you will need to use the disc brake lines.
also, you need to get the teg or si e-brake cables.
Thread
Thread Starter
Forum
Replies
Last Post