92-95 civic b16 swap
02-15-2004, 09:18 AM
#1
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
92-95 civic b16 swap
Hey, I was just wondering if any of you knew where I could get a great deal on a good set of mounts for putting a b16a1 engine into a 92-95 civic hatchback. Also if anyone knows of a place that has the linkage with the mounts that would be great.
-Aaron-
-Aaron-
02-15-2004, 09:25 AM
#2
DESTROYS DONUTS !!
Join Date: Nov 2002
Location: the seed has sprouted.
Posts: 13,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 civic b16 swap
you dont need any specialized bolt in kits or nothing for that year car(if thats what your trying to get info on), just get some stock ones that are in descent shape........
02-15-2004, 09:56 AM
#3
Asshole Supreme
Join Date: Nov 2002
Posts: 4,843
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 civic b16 swap
The shift linkages you need are from an 94+ Integra. The mounts are from an 94+ Integra as well. You will need the rear bracket, the drivers side rubber mount, the front passenger side transmission bracket and the A/C compressor bracket as well. If you want to keep A/C you will need the bracket from the Del Sol Vtec. All of the other mounts you can use from your Civic.
02-15-2004, 07:55 PM
#4
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 civic b16 swap
Hey, so pretty much if the b16a1 comes with all the mounts I can use them, and the axels it comes with, and all I gotta do is the wiring? Does anyone know the weigh of the engine in a 92 civic dx, and the weight of the b16a1, both with transmissions? Just wana know if I should get a good quality lowering springs.
thanks
-Aaron-
thanks
-Aaron-
02-16-2004, 08:57 AM
#6
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 civic b16 swap
Hey I was told I have to use the del sol vtec mounts, is this true, or will the 92 civic dx mounts work fine?
02-16-2004, 09:43 AM
#7
Droppin E-Thugs!!!!!
Join Date: Feb 2003
Posts: 2,050
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 civic b16 swap
gotta use an integra 94-00 rear bracket for the back tranny support and 94-00 integra driver side mount to work also, and that should be it, I gotta b16a in mine, and use a 99 si driver side mount bracket and it bolted right up to my stock mount....just for your information also....
02-16-2004, 02:15 PM
#8
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 civic b16 swap
Hey, you able to get me a deal on the mounting brackets for the b16a in the 92-95 civic? I wana buy the parts as soon as possible and not spend to much you know. Let me know what you can do.
02-17-2004, 03:06 PM
#9
Registered Member
Thread Starter
Join Date: Jun 2003
Location: Mississauga, Ontairo, Canada
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92-95 civic b16 swap
Does anyone know if the rear engine mount bracket on the 94-95 honda del sol vtec, is the same as the 94 integra rear engine mount bracket? Help is well appreciated.
-Aaron-
-Aaron-
Thread
Thread Starter
Forum
Replies
Last Post