Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

300zx

Thread Tools
 
Old 03-20-2009, 06:36 AM
  #1  
SC2
Registered Member
Thread Starter
 
SC2's Avatar
 
Join Date: Mar 2009
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
SC2 has disabled reputation
Default 300zx

Hey, I think I'm in the right area for this. I am confident that I can do all necessary work to the engine in this car, and I have all of the tools and setup to do so (excluding a full machine shop....). But what the real question is, what would you pay for a 1992 300zx NA that had the timing belt break and probably has bent valves/ needs a good engine rebuild. The asking price is $2000, I would be on that if it were 1200ish.

Another question for the 300zx fans, How likely would a valve job/ reworked head and new timing belt fix the issue with this vehicle? Or better question, could the lower end be damaged?

http://norfolk.craigslist.org/cto/1082071451.html
SC2 is offline  
Old 03-20-2009, 06:55 AM
  #2  
Registered member
 
Nick1979's Avatar
 
Join Date: Mar 2008
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Nick1979 has disabled reputation
Default Re: 300zx

I have never owned or worked on a 300zx but I have seen and worked on several cars that broke a timing belt and cracked pistons when they collided with the valves. I think that would be wort case though. Won't really know until the motor is taken apart. Good Luck though.
Nick1979 is offline  
Old 03-20-2009, 04:40 PM
  #3  
Racetracks
 
Fabrik8's Avatar
 
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes on 0 Posts
Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8
Default Re: 300zx

Worst case, you're looking at a new engine. Whether the engine was damaged would depend on the RPM and engine load when the belt broke. If it was low load and low RPM, you may just need a new head or a head rework because you probably have bent valves at a minimum. If it's worse than that, you're looking at replacing the pistons and con rods. Usually the valves are the most fragile thing when a timing belt breaks, and the rest of the valvetrain often takes some damage also.

It's a gamble, you have to decide whether you're prepared to drop a different engine in it if you have to. You didn't do the damage, so you don't know what the conditions were when it happened, and you haven't actually seen the inside of the engine yet.

Last edited by Fabrik8; 03-20-2009 at 04:44 PM.
Fabrik8 is offline  
Old 03-20-2009, 07:17 PM
  #4  
Registered Member
 
weldmatic's Avatar
 
Join Date: Oct 2008
Posts: 301
Likes: 0
Received 0 Likes on 0 Posts
weldmatic has disabled reputation
Default Re: 300zx

car is worth 500 bux.

you can get n/as all day for 1500 to 3k for a z32


a blown na is parts
weldmatic is offline  
Old 03-21-2009, 08:17 PM
  #5  
Registered Member
 
Al_P's Avatar
 
Join Date: Dec 2003
Location: Virginia Beach
Posts: 1,026
Likes: 0
Received 0 Likes on 0 Posts
Al_P has disabled reputation
Default Re: 300zx

You are looking at a real live nightmare. Instead of tearing the engine apart in car and risk screwing something up you may as well get a used unit from Jhot for around 1200 with trans. I THINK they still have it. It will run you cheaper or same then time /parts you need to put in it.

If you decide to do a rebuild all i got to say is enjoy removing the exhaust manifolds and intake plenum Imagine yourself being the "receiver" in a relationship...that's how it will feel No joke.

O and no car is not worth 2k, its been for slae for months! Car seems fairly clean, offer him a grand see what happens.
Al_P is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
92s13
Parts ARCHIVE
4
09-03-2008 05:59 PM
cjreppin757
Automotive Discussion
2
01-30-2008 12:28 PM
driftnismo18
Automotive Discussion
4
06-01-2005 02:13 PM



Quick Reply: 300zx



All times are GMT -8. The time now is 09:28 AM.