hey everybody i just got my 00 si harness back from arnel and he did an AWESOME job! Now i am looking through my si manual and labeling all of the sensors according to their wire colors. So far i have labeled these--->

Vtec solenoid
Lock-Up Control Solenoid Valve
Engine Coolant Temperature Sensor
IAT Sensor
MAP Sensor
Crankshaft Positioning Sensor
Throttle Positioning Sensor
IACV
Evaporative Emission Purge Solenoid Valve
All Injectors


Alright i need help labeling these--->

I have 2 sensors that have a GREEN WIRE and a BLACK WIRE.


1 sensor that has 2 wires,a BLUE W/BLACK STRIPE wire and a BLACK wire(located by the vtec solenoid)


1 sensor that has 1 wire- RED/BLUE STRIPE


1 sensor that has 1 wire- YELLOW/RED STRIPE


1 sensor that has 2 wires- WHITE/RED STRIPE and BLUE/RED STRIPE

 

does anyone know where i can get a whole wire layout for a si engine harnesss??????!!

 

why dont u just look at somebody thats on a motorif u wanna do that i have a 99 si harness on my single cam thats pulled from the motor u can peep at if you want

 

Bobby, call me tonight 757 575 8069. I gave Jay the paper that described some of those wirings. I also have the Civic 96-00 manual..... we shouldnt need that at all. But we can meet up and I'll tell you exactly which plug goes to where. Dont listen to what everybody else has to say here (no pun intended) because I had to transfer some of the plugs/connectors from your old harness to this new harness..... meaning, that the wire colors will not be the same as stock.

 

.... and bring the paper I gave Jay.....

 

A factory manual would help immensely with this.
THis might help, I think this is the right manual for that car..
http://downloads.hondatech.info/Auto...e%20Manual.zip

 

Bobby, call me again. I just walked in. Was out to sea.....

 

ttt defanitly need help this weekend, the motor is going in on saturday.