ok im swappin a da from auto to manual..got the tranny in.. but just need a clutch cable is there anything else electrical or any other issues that i might have.. let me know..thanks for ur help

 

have to tie a couple of the wires together at the auto shifter plug, two big wires if i remember correctly. Have to hardwire backup lights. Drill hole for clutch cable we used a wood boring bit.

 

tanks for tha help bro

 

its a hard first timer job good luck!

 

make sure when u splice the shifter wires together u dont do it on the harness side. cut the plug off the shifter so that u can always plug one back in(not that u would want to)

 

change ecu to keep light off drilling that hole is a pain in the ass drill a couple of holes after you mount the shifter use bolts and nuts and if memory serves me correct you will have to grind the mount to make it slide in the body good luck it only took a few hours when I did mine changing the pedals and everything

 

muchas grasias for the help

 

http://hondaswap.com/swap-articles/a...version-27054/