so I'm replacing my struts in my 95 integra, the back bolts that connect the strut to the control arm is seized up and I'm going to have to replace it. The problem is I don't have a acura dealer around to get new bolt, but i do have a honda dealer close. My question is will the bolts off like a 97 cive be ok to put on my integra? Does it matter? Should this work?

 

The Integra bolt is a little bit longer so it might not work... It's a 10x84 while the Civic uses a 10x80.

 

Get one from a 95 Honda Del Sol VTEC, it's the same exact size as the Integra....

 

Thanks, I guess I'll call some auto places to see if they have something

 

http://www.acuraoemparts.com/delray/jsp/home.jsp

Had the samething happen to me n the bolts r $16 a piece. I'd buy oem bolts before I'd use some ramdom one. If u have to use it temporary its fine.

 

Too much for a bolt. Try www.hondaautomotiveparts.com or http://www.acuraautomotiveparts.org

 

so the one for a 95 del sol is the same size? If so that solves my problem I'll just go to bond and get it. As long you are 100% sure

 

Yes, look both parts up on the websites I posted above. Same exact part.

 

Cool, thanks for everything bro

 

what about a junk yard