WTS: D16A1 longblock, still in car 171K
#1
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
WTS: D16A1 longblock, still in car 171K
FS: 88 D16A1 DOHC @ 171K,
I got an 88 integra, dont need the stock motor so I'm selling it. It still in car, put a new dizzy on it a few weeks back, ran fine up til yesterday. car gets up to speed and then goes crazy after 2K or too much gas. I think its some sensors cause I put new plugs in it today and helped a little bit. car runs fine out of gear though.
Ill include the new dizzy with less than 1K miles on it, intake mani, fuel rail, injectors, throttle body, and flywheel. I need the tranny/clutch assembly,header and the accessories but you get the complete motor, no mounts or extras other than what is mentioned.
motor is still in car to prove its worth, I would need a $100 deposit in cash before I pull the motor. If I pull the motor and you back out, I'll be damned if I'm not getting paid for it. so dont try to BS. serious inquiries only asking $300 OBO trades for fresh high CR pistons, aftermarket D16 cam. I'll snap pics if necessary but its a stock unmolested motor that is kinda greasy. use your imagination. available to run the car any time before 4 usually any day, except saturday may 31. PM serious offers only, and I could possibly deliver.
I got an 88 integra, dont need the stock motor so I'm selling it. It still in car, put a new dizzy on it a few weeks back, ran fine up til yesterday. car gets up to speed and then goes crazy after 2K or too much gas. I think its some sensors cause I put new plugs in it today and helped a little bit. car runs fine out of gear though.
Ill include the new dizzy with less than 1K miles on it, intake mani, fuel rail, injectors, throttle body, and flywheel. I need the tranny/clutch assembly,header and the accessories but you get the complete motor, no mounts or extras other than what is mentioned.
motor is still in car to prove its worth, I would need a $100 deposit in cash before I pull the motor. If I pull the motor and you back out, I'll be damned if I'm not getting paid for it. so dont try to BS. serious inquiries only asking $300 OBO trades for fresh high CR pistons, aftermarket D16 cam. I'll snap pics if necessary but its a stock unmolested motor that is kinda greasy. use your imagination. available to run the car any time before 4 usually any day, except saturday may 31. PM serious offers only, and I could possibly deliver.
Last edited by 83Stang5.0; 05-30-2008 at 05:27 PM. Reason: fixed price
#2
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: D16A1 longblock, still in car 171K
bump, got a pending sale but doesn't mean anything til someone puts money in my hand.
#3
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: D16A1 longblock, still in car 171K
bump
#4
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: D16A1 longblock, still in car 171K
bump, might fix the problem and drive the DOHC D for awhile
emphasis on OBO
emphasis on OBO
#5
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: D16A1 longblock, still in car 171K
bump
I'm trying to get some expert info on whats up with the car. it runs perfect out of gear, and I can even baby it down the street short shifting, and it wont really mess up. its gotta be a sensor or something, I just put a brand new dizzy on this bitch. new NGK plugs too. If I fix the car, I might try to sell it though so if you might be interested feel free to shoot me a pm.
duh, forgot to say that I'll trade the motor for fresh D16 pistons(stock is ok, aftermarket is better. higher compression pistons preferred, as in higher than Y8 pistons.) I need a new crank, again for a Y8, stock is fine, aftermarket better. rings, maybe rods, not sure what my current one's condition is. I'm looking for a fresh valvetrain for my Z6 head. I need a vtec solenoid, I'm not sure what else. Im doing a build/rebuild and theres plenty of random stuff I need right now. I would also pay cash for these parts, although I'd prefer to deal with the motor first. PM serious offers, dont BS
I'm trying to get some expert info on whats up with the car. it runs perfect out of gear, and I can even baby it down the street short shifting, and it wont really mess up. its gotta be a sensor or something, I just put a brand new dizzy on this bitch. new NGK plugs too. If I fix the car, I might try to sell it though so if you might be interested feel free to shoot me a pm.
duh, forgot to say that I'll trade the motor for fresh D16 pistons(stock is ok, aftermarket is better. higher compression pistons preferred, as in higher than Y8 pistons.) I need a new crank, again for a Y8, stock is fine, aftermarket better. rings, maybe rods, not sure what my current one's condition is. I'm looking for a fresh valvetrain for my Z6 head. I need a vtec solenoid, I'm not sure what else. Im doing a build/rebuild and theres plenty of random stuff I need right now. I would also pay cash for these parts, although I'd prefer to deal with the motor first. PM serious offers, dont BS
Last edited by 83Stang5.0; 06-03-2008 at 10:38 AM. Reason: im a retard
#6
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: D16A1 longblock, still in car 171K
bump
#7
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: D16A1 longblock, still in car 171K
bump, I need this motor gone. make me a serious offer
#9
Digital Life
Thread Starter
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTS: D16A1 longblock, still in car 171K
deal pending on motor
Thread
Thread Starter
Forum
Replies
Last Post