Precision SC61, InlinePro mani, Innovative Wastegate
#1
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Precision SC61, InlinePro mani, Innovative Wastegate
I Bought these parts before i decided that i wanted to go all-motor. So this sucks for me, but i need to get some money back on them.
The Turbo is a Precision 6152SP, I bought the Turbo a few months ago brand new from Precision, It cost me almost $1,000.00
On the tag on the side it says PTB-500-6152. The turbine Housing is TH8152A. This is a T-4 .81 AR Exhaust Turbine side, and a .71 compressor side. The exducer diameter is 2.437", and the inducer is 2.759". The inlet on the compressor side is 4", and the outlet is 2.5". On the Exhaust side the exhaust is 3" v-band style. This turbo has NEVER even been bolted on. My loss is your gain, i hope someone makes huge power with this
HP rating is 650
Willing to sell turbo for $750
Manifold is a new InlinePro mani with t4 flange and the wastegate is 60mm (I think, all i know is it was used on a 600+ Hp car for a summer, and i bought it for my setup... bolts directly on the mani so i dunno.
Im only willing to sell the mani and wastegate with the turbo - Not selling them seperatly
Selling all three only together for $1300
Some things i need are Skunk2 Pro series cams stage 2 or 3 for b-series
New Skunk2 high compression valves for b-series
valve springs and retainers
The Turbo is a Precision 6152SP, I bought the Turbo a few months ago brand new from Precision, It cost me almost $1,000.00
On the tag on the side it says PTB-500-6152. The turbine Housing is TH8152A. This is a T-4 .81 AR Exhaust Turbine side, and a .71 compressor side. The exducer diameter is 2.437", and the inducer is 2.759". The inlet on the compressor side is 4", and the outlet is 2.5". On the Exhaust side the exhaust is 3" v-band style. This turbo has NEVER even been bolted on. My loss is your gain, i hope someone makes huge power with this
HP rating is 650
Willing to sell turbo for $750
Manifold is a new InlinePro mani with t4 flange and the wastegate is 60mm (I think, all i know is it was used on a 600+ Hp car for a summer, and i bought it for my setup... bolts directly on the mani so i dunno.
Im only willing to sell the mani and wastegate with the turbo - Not selling them seperatly
Selling all three only together for $1300
Some things i need are Skunk2 Pro series cams stage 2 or 3 for b-series
New Skunk2 high compression valves for b-series
valve springs and retainers
Last edited by gmacarize; 06-29-2007 at 02:55 PM.
#2
RIP Chris Schader
Re: Precision SC61, InlinePro mani, Innovative Wastegate
trade me compressor covers. i have the same, brand new just no surge holes
#3
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision SC61, InlinePro mani, Innovative Wastegate
bump..
#4
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision SC61, InlinePro mani, Innovative Wastegate
bump
#5
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision SC61, InlinePro mani, Innovative Wastegate
morning bump
#6
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision SC61, InlinePro mani, Innovative Wastegate
pm replied
#7
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision SC61, InlinePro mani, Innovative Wastegate
to the top
#8
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision SC61, InlinePro mani, Innovative Wastegate
.... bump
#10
Registered Member
Thread Starter
Join Date: May 2007
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision SC61, InlinePro mani, Innovative Wastegate
pm replied... someone buy these parts