Inlinepro Built Ls-Vtec Motor $3000
02-26-2008, 08:20 AM
#1
Banned
Thread Starter
Join Date: Feb 2006
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Inlinepro Built Ls-Vtec Motor $3000
--------------------------------------------------------------------------------
I an Ls-vtec motor for sale built by inlinepro the swap is only a year old and don't even have over 10,000 miles on it. It has pr3 b16 piston new ls rods, arp rod bolts and head bolts, its been balanced and blue printed, new type R oil pump, water pump, and gsr timing belt it been bored .20 over and the piston are oversized, the head is a b16 stock but has been hot tanked so have the block, it has new valve springs and retainers, valves and a new head gasket, all new seals every thing was replaced its practically new. its a very strong motor I haven't lost wit it yet and i have raced evo's, turbo neons, type R hatches, gsr hatches, only thing i haven't race is a k20 hatch, but i bet it will beat or hang side by side wit one. the compression is around 11:7:1
I am selling it for $3000, just the motor I have a cable B16 transmission but its missing 4th gear I will sell that for $250, i also have a 0bd0 to 0bd1 jumper harness i will let go for $100, and a 0bd1 gsr ecu for $100, and a set of race headers for $100. the motor is still in my car and if you want I will let you listen to it. I recently wrecked it but the motor is fine thats why I am selling it. If u are interested give me call at 540 841 7434 ask for squirrel
I an Ls-vtec motor for sale built by inlinepro the swap is only a year old and don't even have over 10,000 miles on it. It has pr3 b16 piston new ls rods, arp rod bolts and head bolts, its been balanced and blue printed, new type R oil pump, water pump, and gsr timing belt it been bored .20 over and the piston are oversized, the head is a b16 stock but has been hot tanked so have the block, it has new valve springs and retainers, valves and a new head gasket, all new seals every thing was replaced its practically new. its a very strong motor I haven't lost wit it yet and i have raced evo's, turbo neons, type R hatches, gsr hatches, only thing i haven't race is a k20 hatch, but i bet it will beat or hang side by side wit one. the compression is around 11:7:1
I am selling it for $3000, just the motor I have a cable B16 transmission but its missing 4th gear I will sell that for $250, i also have a 0bd0 to 0bd1 jumper harness i will let go for $100, and a 0bd1 gsr ecu for $100, and a set of race headers for $100. the motor is still in my car and if you want I will let you listen to it. I recently wrecked it but the motor is fine thats why I am selling it. If u are interested give me call at 540 841 7434 ask for squirrel
Last edited by Demboyz3; 02-27-2008 at 12:19 PM.
02-26-2008, 08:53 AM
#2
Registered User
Join Date: Jan 2006
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
pics of header?
02-26-2008, 08:55 AM
#3
VTEC
Join Date: Nov 2004
Location: Newport news 757
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
what you mean the tranny is missing 4th gear
02-26-2008, 09:23 AM
#4
Registered Member
Join Date: Jun 2006
Location: Is For Lovers, VA
Posts: 1,798
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
upp for a good guy. and a strongggg motor. shit's nastyyy.
wont go into 4th.
wont go into 4th.
02-26-2008, 12:19 PM
#5
99crx page
Join Date: Aug 2007
Location: northern virginia
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
location??
02-27-2008, 04:19 AM
#6
Banned
Thread Starter
Join Date: Feb 2006
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
I have this motor in a crx too. I am located in Fredericksburg VA. I was at the track and I blew 4th gear out.
Last edited by Demboyz3; 02-27-2008 at 04:22 AM.
02-27-2008, 06:16 AM
#7
braap braap
Join Date: Jul 2003
Location: Portsmouth
Posts: 14,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
What cams are in it and what did it make power wise?
02-27-2008, 06:44 AM
#8
Registered Member
Join Date: Jan 2007
Location: king george
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
i got 60 cash in hand for the ecu
02-27-2008, 06:49 AM
#9
Registered Member
Join Date: Jun 2004
Location: Va
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
Your selling that motor........Noooooooooooo! that motor is nasty
02-27-2008, 12:17 PM
#10
Banned
Thread Starter
Join Date: Feb 2006
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inlinepro Built Ls-Vtec Motor $3000
The cams are stock. the whole head is stock but the bottom end is built. If anyone know Squirrel n my brother JB they know this motor is a definite winner.
Last edited by Demboyz3; 02-27-2008 at 12:21 PM.