FS: Fully Built 205whp LSVTEC part-out
Thread Starter
braap braap
Joined: Jul 2003
Posts: 14,536
Likes: 0
From: Portsmouth
FS: Fully Built 205whp LSVTEC part-out
Name: Jarrod
Contact: PM or my cell-phone (757) 675-4054.
Location: Portsmouth
I have for sale a bunch of parts from a 205whp LSVTEC build. The build was parted to go for bigger and better things, but really a change of heart. cough boost. The head isn't for sale yet, so don't ask about it.
Wisepanda was the builder of the motor, remember that raw ass CRX? Yup, it's from that car. It was in a Si and now it's time for a change. The motor DID NOT and WILL NOT smoke. I'll put my name on it. Religiously maintained and either I, Wisepanda or RattyGoat off here worked on it. It was ALWAYS OEM HONDA stuff in it. Oil of choice was Mobil 1 Full Synthetic 5w-30. Always Honda filter.
It was tuned by Shad Sawyer at Accuracy Automotive. And daily driven everyday with AC. Motor made 205 reving to 8 grand.
The bottom was fully brand new. Crank was checked before assembly. It was bored .20 over. Pistons are Wiseco 12:1 off the shelf GSR pistons. Eagle rods. ALL OEM HONDA BEARINGS were used. Type R oil pump. OEM HONDA Water pump. Will include the timing belt with bottom end. LS lower cover. Using that on next build. I have to get back ya'll on the decking that was done, it was minmal but I'd like to know the final numbers. Mileage on it is a little over 15,000. I'm asking 1000 OBO for this. 1200 if you want the o.e flywheel, crank pully and altnator.
If the motor doesn't sell, it will be parted.
Edelbrock Cams for B-Series. Made great mid range and only reved to 8 grand, not a RPM higher. -350 OBO.
Hondata S100- P28- Brauning Motorsports chipped it. Tune on it for motor above- 200 obo
Crane Cam Gears- 100 obo
Powerplus Intake Manifold. With IAT sensor still on it. Will include Hondata Intake Manifold Gasket if price is met. 150 obo
This wasn't used on the setup, but selling because. 00 Si T.B. with all sensors- 50
b16 valve cover. Cut for cam gears(not moon cuts). wrinkle red -60
Custom Made 2.5inch by MRD(Jerry Jones made it) Vibrant Exhaust. Nice deep tone, sounds great but going bigger later on. 180 OBO
Gs-R headstuds. Torqued once. -50.
Head will be posted later on, still undecided to keep it or not.
What I will trade for.
A JDM B16a(obd-2) with documentation.
A B16a2 with documentation.
Any questions, PM me. Any clowns can kick rocks, got something smart to say, stay the fuck outta my thread. Pictures per request.
Bottom end is still in the car, once we have a buyer. It will be pulled that day. I have nothing to hide, and I'm a honest seller, peep the trader rating.
Contact: PM or my cell-phone (757) 675-4054.
Location: Portsmouth
I have for sale a bunch of parts from a 205whp LSVTEC build. The build was parted to go for bigger and better things, but really a change of heart. cough boost. The head isn't for sale yet, so don't ask about it.
Wisepanda was the builder of the motor, remember that raw ass CRX? Yup, it's from that car. It was in a Si and now it's time for a change. The motor DID NOT and WILL NOT smoke. I'll put my name on it. Religiously maintained and either I, Wisepanda or RattyGoat off here worked on it. It was ALWAYS OEM HONDA stuff in it. Oil of choice was Mobil 1 Full Synthetic 5w-30. Always Honda filter.
It was tuned by Shad Sawyer at Accuracy Automotive. And daily driven everyday with AC. Motor made 205 reving to 8 grand.
The bottom was fully brand new. Crank was checked before assembly. It was bored .20 over. Pistons are Wiseco 12:1 off the shelf GSR pistons. Eagle rods. ALL OEM HONDA BEARINGS were used. Type R oil pump. OEM HONDA Water pump. Will include the timing belt with bottom end. LS lower cover. Using that on next build. I have to get back ya'll on the decking that was done, it was minmal but I'd like to know the final numbers. Mileage on it is a little over 15,000. I'm asking 1000 OBO for this. 1200 if you want the o.e flywheel, crank pully and altnator.
If the motor doesn't sell, it will be parted.
Edelbrock Cams for B-Series. Made great mid range and only reved to 8 grand, not a RPM higher. -350 OBO.
Hondata S100- P28- Brauning Motorsports chipped it. Tune on it for motor above- 200 obo
Crane Cam Gears- 100 obo
Powerplus Intake Manifold. With IAT sensor still on it. Will include Hondata Intake Manifold Gasket if price is met. 150 obo
This wasn't used on the setup, but selling because. 00 Si T.B. with all sensors- 50
b16 valve cover. Cut for cam gears(not moon cuts). wrinkle red -60
Custom Made 2.5inch by MRD(Jerry Jones made it) Vibrant Exhaust. Nice deep tone, sounds great but going bigger later on. 180 OBO
Gs-R headstuds. Torqued once. -50.
Head will be posted later on, still undecided to keep it or not.
What I will trade for.
A JDM B16a(obd-2) with documentation.
A B16a2 with documentation.
Any questions, PM me. Any clowns can kick rocks, got something smart to say, stay the fuck outta my thread. Pictures per request.
Bottom end is still in the car, once we have a buyer. It will be pulled that day. I have nothing to hide, and I'm a honest seller, peep the trader rating.
Thread Starter
braap braap
Joined: Jul 2003
Posts: 14,536
Likes: 0
From: Portsmouth
Thread
Thread Starter
Forum
Replies
Last Post
skworden
Parts ARCHIVE
17
Apr 3, 2008 09:31 AM