How to fix ?
#1
How to fix ?
Hey guys, I jsut picked up a 97 ranger. Its a 4x4 and its alright for what i got it for. The problem is it sits like 3 inches higher in the rear than the front. How do i get the front to raise up , without buying a whole lift kit. What do I need and is it easy.
#6
just a little 4x4
Join Date: Apr 2006
Location: 757
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to fix ?
http://jackit.com/springs/skyjacker_coil.htm#ford
there are some coil springs for it
and
http://jackit.com/springs/tuff_coil.htm
but you gotta watch and make sure ya ain't gonna over extend the front end and need longer shocks and possible drop down brackets for the ifs
there are some coil springs for it
and
http://jackit.com/springs/tuff_coil.htm
but you gotta watch and make sure ya ain't gonna over extend the front end and need longer shocks and possible drop down brackets for the ifs
#7
Re: How to fix ?
Hey if I order those coil springs in the first link, would they over extend it . Its only 1.5 -2 inch lift. And are they hard to install or is it jsut like lowering springs with a spring compressor and that routine
#8
just a little 4x4
Join Date: Apr 2006
Location: 757
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to fix ?
idk on ur truck as far as that goes . . if ya check into what comes with a 2 inch lift ya could probably tell . . . . and yeah probably take the shock off and spring compressor and old ones out new ones in . . . would have to look at it defently to tell ya on that one . . but yeah ya gotta do some research
#9
Registered Member
Join Date: Apr 2008
Location: Richmond, VA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to fix ?
F 150 spacers are what you want. I would go to the rangerstation.com or explorerforum.com use the on-site search function and you will find more info than you care to read.