JL Audio 300/4 Amplifier.
Thread Starter
Registered Member
Joined: Mar 2007
Posts: 162
Likes: 0
From: Da Burbs, MD
JL Audio 300/4 Amplifier.
Selling my JL Audio 300/4 amplifier I have had for a few years. Was in my 93 frostwhite EX sedan and took it out prior to its sale back in 2007.
Since then, amp has been in my bedroom closet, top shelf, in the vault.
NEVER did I once pounce on this beauty.
One of the BEST amplifiers I have ever owned. Main reason I am selling it now is I have a JL Audio 500/5 amplifier. And would be pointless to have this one. So rather than me be selfish, would rather much share the unit.
ABSOLUTELY NOTHING WRONG WITH IT! AND never had to be sent back for any repairs either!!!
NO scratches, dents, bends, etc...
Specs as follows:
75 Watts x 4 RMS @ 1.5-4 Ohms
* 150 x 2 bridged RMS power @ 3-8 ohms
* Built-In Electronic high and low pass Crossover, Selectable 12/24dB
* Built-In Parametric EQ
* THD: <.003% @ 4 ohms, 50Hz
* S/N: >108.5 dB at rated power
* Frequency Response: 5 Hz - 30 KHz
* Dampening Factor: > 200@4 Ohms/50Hz
* 12dB Crossover
* 24dB Linkwitz-Riley Crossover selection
* Crossover Frequency: 50Hz - 5 KHz
* Parametric EQ Frequency: 20Hz - 80Hz
* Phase Control
* Requires 4 gauge power and ground leads
With all that said, my price is $200 and firm.
Since then, amp has been in my bedroom closet, top shelf, in the vault.
NEVER did I once pounce on this beauty.
One of the BEST amplifiers I have ever owned. Main reason I am selling it now is I have a JL Audio 500/5 amplifier. And would be pointless to have this one. So rather than me be selfish, would rather much share the unit.
ABSOLUTELY NOTHING WRONG WITH IT! AND never had to be sent back for any repairs either!!!
NO scratches, dents, bends, etc...
Specs as follows:
75 Watts x 4 RMS @ 1.5-4 Ohms
* 150 x 2 bridged RMS power @ 3-8 ohms
* Built-In Electronic high and low pass Crossover, Selectable 12/24dB
* Built-In Parametric EQ
* THD: <.003% @ 4 ohms, 50Hz
* S/N: >108.5 dB at rated power
* Frequency Response: 5 Hz - 30 KHz
* Dampening Factor: > 200@4 Ohms/50Hz
* 12dB Crossover
* 24dB Linkwitz-Riley Crossover selection
* Crossover Frequency: 50Hz - 5 KHz
* Parametric EQ Frequency: 20Hz - 80Hz
* Phase Control
* Requires 4 gauge power and ground leads
With all that said, my price is $200 and firm.
Last edited by Daft Punk; Mar 27, 2009 at 06:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
