Wide Body Sil80
#1
Friendly Jackboot
Thread Starter
Join Date: Oct 2005
Location: NoVA
Posts: 4,281
Likes: 0
Received 0 Likes
on
0 Posts
Wide Body Sil80
this is a fully loaded track/drift/daily/head turner. i've built this car myself from the ground up and supervised everything i couldnt do myself (i also have a binder of every single record or part/maintence). the only reason i'm selling is because i just dont have the money to compete this season and or time of work to fully enjoy the car. i'm also going to pay off some debt i've accumulated. since the rebuild (i picked it up as a shell for this season) its only been to one practice event an seen MAYBE 300 miles. the engine itself (built head sr20) has a little over 50k on it. the cage (which passed tech for formula d was welded my millenium racing development in portsmouth virginia, and lastly all the machine work was completed by aerodyne industries in chesapeake va. i've worked all the "fresh build" bugs out of it (power steering pump, new axles, etc.) its %100 reliable and a blast to drive. i built this car with the purpose to have fun and be reliable over everything.
The Bad
-when the car was wetsanded and buffed, it went to deep and the car needs to be re cleared.
-the z32 mafs was bad and i picked up a stock one, they need to swapped out/wired in
-3 of the valve cover bolts are stripped HOWEVER the valve cover sits/seals fine with NO leaks
huge price drop, i'm moving out of the country for work and cant bring a car. i would like to sell it but dont bother trying to lowball me if worse comes to worse i'm going to store it in my moms garage.
Price: $12,000
Location: Nova (can transport to 757)
Name: Tim
Contact Info:timothy.florio@usmc.mil or pm or 757-287-9689
Engine
S13 redtop sr20det
Multi angle valve job
Godspeed intercooler/greddy piping
Hks hi power exhaust System
Brian crower valve springs
Brian crower retainers
Brian crower intake/exhaust valves
Brian crower 264/264 camshafts
Greddy type rs blow off valve
Greddy rocker arm stoppers (NOT INSTALLED)
Greddy catch can kit
Circuit sports coolant reserve tank
Greddy oil filter relocation kit
Greddy 3in downpipe
Greddy oil pan
Greddy intake manifold
Greddy turbo outlet pipe
Greddy intake suction kit
Garret gt28r turbo
earls stainless steel turbo lines
Arp head stud kit
Greddy metal headgasket
Megan racing exhaust manifold
Greddy profec b boost controller
Hks turbo timer
Megan racing lightweight pulley kit
Apexi afc neo engine management (NOT INSTALLED)
Kazama motor mounts
Koyo aluminum radiator w/ Flex-a-Lite Fans
Suspension/Brakes
Apexi n1 exv coilovers,
Suspension techniques front/rear sway bars
Project nissan rear upper control arms
Megan racing front tension rods
Tein inner/outter tie rods
Megan racing rear toe arms
Custom front power brace
Project mu d1 spec rear brake pads
Motul rbf660 fluid
Axis metal master front pads
Drivetrain
B&M short shifter
Exedy Stage 2 clutch (cerametallic/3 puck)
Exedy lightweight flywheel
Kaaz 2way diff (fluid changed regularly)
Exterior
Nissan daytona blue paint
Bmagic d1 body kit w/ 20mm fenders front/50mm fenders rear
Aerocatch hoodpins,
Chargespeed s13 grill
Seibon dv carbon fiber hood
180sx type-x tail lights
Origin labs carbon fiber roof spoiler
Interior
Buddy club racing bucket seats
Takata harness's
Nardi steering wheel
Nrg quick release steering wheel hub
Kazama shift knob/drift knob
Greddy oil pressure
Greddy water temp. gauge
Greddy boost gauge
Full S&W Race 6pt roll cage
Fresh Front Carpet/floor mats (that were actually made for a 240 not some autozone shit)
suede for door panels/glove box (not wrapped on yet, but any upholstrey place can do)
Wheels
Phase2motortrend’s “elite” deep dishes with fresh tires on all 4
The Bad
-when the car was wetsanded and buffed, it went to deep and the car needs to be re cleared.
-the z32 mafs was bad and i picked up a stock one, they need to swapped out/wired in
-3 of the valve cover bolts are stripped HOWEVER the valve cover sits/seals fine with NO leaks
huge price drop, i'm moving out of the country for work and cant bring a car. i would like to sell it but dont bother trying to lowball me if worse comes to worse i'm going to store it in my moms garage.
Price: $12,000
Location: Nova (can transport to 757)
Name: Tim
Contact Info:timothy.florio@usmc.mil or pm or 757-287-9689
Engine
S13 redtop sr20det
Multi angle valve job
Godspeed intercooler/greddy piping
Hks hi power exhaust System
Brian crower valve springs
Brian crower retainers
Brian crower intake/exhaust valves
Brian crower 264/264 camshafts
Greddy type rs blow off valve
Greddy rocker arm stoppers (NOT INSTALLED)
Greddy catch can kit
Circuit sports coolant reserve tank
Greddy oil filter relocation kit
Greddy 3in downpipe
Greddy oil pan
Greddy intake manifold
Greddy turbo outlet pipe
Greddy intake suction kit
Garret gt28r turbo
earls stainless steel turbo lines
Arp head stud kit
Greddy metal headgasket
Megan racing exhaust manifold
Greddy profec b boost controller
Hks turbo timer
Megan racing lightweight pulley kit
Apexi afc neo engine management (NOT INSTALLED)
Kazama motor mounts
Koyo aluminum radiator w/ Flex-a-Lite Fans
Suspension/Brakes
Apexi n1 exv coilovers,
Suspension techniques front/rear sway bars
Project nissan rear upper control arms
Megan racing front tension rods
Tein inner/outter tie rods
Megan racing rear toe arms
Custom front power brace
Project mu d1 spec rear brake pads
Motul rbf660 fluid
Axis metal master front pads
Drivetrain
B&M short shifter
Exedy Stage 2 clutch (cerametallic/3 puck)
Exedy lightweight flywheel
Kaaz 2way diff (fluid changed regularly)
Exterior
Nissan daytona blue paint
Bmagic d1 body kit w/ 20mm fenders front/50mm fenders rear
Aerocatch hoodpins,
Chargespeed s13 grill
Seibon dv carbon fiber hood
180sx type-x tail lights
Origin labs carbon fiber roof spoiler
Interior
Buddy club racing bucket seats
Takata harness's
Nardi steering wheel
Nrg quick release steering wheel hub
Kazama shift knob/drift knob
Greddy oil pressure
Greddy water temp. gauge
Greddy boost gauge
Full S&W Race 6pt roll cage
Fresh Front Carpet/floor mats (that were actually made for a 240 not some autozone shit)
suede for door panels/glove box (not wrapped on yet, but any upholstrey place can do)
Wheels
Phase2motortrend’s “elite” deep dishes with fresh tires on all 4
Last edited by sidewaysil80; 07-21-2008 at 04:05 AM.
#2
Ultra Smoke
Join Date: May 2005
Location: Bo's Tires and Rims !!
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wide Body Sil80
OMG I hate to see you sell this beast, but I can vouch for the nastiness that is this car. Good luck dude !!!
#3
peaches
Join Date: Mar 2008
Location: not a cville fag
Posts: 3,455
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wide Body Sil80
sweetest sileighty in the place... good luck on the sell i know id give my house and cars for it
#4
CPL Us Army
Join Date: May 2006
Location: FREDERICKSBURG
Posts: 7,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wide Body Sil80
wow thanks sexy! good luck with sale.
#5
Fuck Bitches, Get $$
Join Date: Sep 2006
Location: Mechanicsville, Va.
Posts: 3,925
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wide Body Sil80
Thanks for the new wallpaper. Amazing.
#7
JB-AP1 (Johnny)
Join Date: Jan 2007
Location: In a fucking cubicle
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wide Body Sil80
This wins the cake for all Nissans for sale right now.
#10
GUIBO!?
Join Date: May 2004
Location: Virginia Beach
Posts: 5,999
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wide Body Sil80
quick question... for the phase2 rims, did you have them on when you didnt have the widebody? and if you did how did it look?
gl with sale dude.. love the car
gl with sale dude.. love the car