2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
#1
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
Name: Matt
Location: Winchester Va.
Means of contact: Thread or PM
Price: $5500 OBO, NO PART OUT!
Description: Hey everyone I'm new to this forum. I have been a member of a Mazda forum for years with no local buyers. I have a 2003.5 Mazdaspeed Protege with 47k original miles. I bought the car that the previous owner starved of oil. Which blew the motor sadly. So I decided to build the car that I wanted. So I have had the motor built the way I wanted. As of now the car is missing the engine because funds ran out to finish. The motor is disassembled but really needs put together. With the motor together it will be able to handle 600+hp. Needs a new turbo (bigger than gt25). Here is a list of parts as well as pictures. Panns Auto FMIC, Injen CAI, iON 3" Turbo Back Exhaust, HKS SSQV BOV, Apex'i Turbo Timer, Apex'i AVC-R EBC, Original Tokico Blue Shocks with iON performance springs, GT Spec Lower Front Tie, GT Spec V brace, kartboy shift knob and short shifter,fully built forged motor, Arias 9:1 Compression coated pistons w/ heavy duty wrist pins, K1 Rods, ACL Race Bearings, ARP Main Studs and Exhaust Studs. There are some other extras. The car has a key mark down drivers side that was there before purchase and passenger mirror was broken due to weight of snow $120 bucks painted from Mazda Dealer. I have over 4grand in the motor and build plus still owe a little bit on the auto loan. I really dont wanna get rid of it but need to. So a good home is a must!
Pictures:
Location: Winchester Va.
Means of contact: Thread or PM
Price: $5500 OBO, NO PART OUT!
Description: Hey everyone I'm new to this forum. I have been a member of a Mazda forum for years with no local buyers. I have a 2003.5 Mazdaspeed Protege with 47k original miles. I bought the car that the previous owner starved of oil. Which blew the motor sadly. So I decided to build the car that I wanted. So I have had the motor built the way I wanted. As of now the car is missing the engine because funds ran out to finish. The motor is disassembled but really needs put together. With the motor together it will be able to handle 600+hp. Needs a new turbo (bigger than gt25). Here is a list of parts as well as pictures. Panns Auto FMIC, Injen CAI, iON 3" Turbo Back Exhaust, HKS SSQV BOV, Apex'i Turbo Timer, Apex'i AVC-R EBC, Original Tokico Blue Shocks with iON performance springs, GT Spec Lower Front Tie, GT Spec V brace, kartboy shift knob and short shifter,fully built forged motor, Arias 9:1 Compression coated pistons w/ heavy duty wrist pins, K1 Rods, ACL Race Bearings, ARP Main Studs and Exhaust Studs. There are some other extras. The car has a key mark down drivers side that was there before purchase and passenger mirror was broken due to weight of snow $120 bucks painted from Mazda Dealer. I have over 4grand in the motor and build plus still owe a little bit on the auto loan. I really dont wanna get rid of it but need to. So a good home is a must!
Pictures:
Last edited by lovemyfs2003; 01-26-2012 at 06:20 PM.
#2
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
What the engine looks like inside car...
That's all the pictures I currently have that show most of all parts of car. Feel free to message and ask as many questions as you want. Some of the pics have the sn and date from October when i took pics for another forum. Everything is the same.
That's all the pictures I currently have that show most of all parts of car. Feel free to message and ask as many questions as you want. Some of the pics have the sn and date from October when i took pics for another forum. Everything is the same.
#3
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
Saturday Bump.
#4
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
Sunday Bump.
#6
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
huh?
#7
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
bump
#9
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
Bump
#10
Registered Member
Thread Starter
Join Date: Jan 2012
Location: Winchester
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003.5 Mazdaspeed Protege $5500 OBO LOTS of pics
Nobody is interested in this?