1995 240sx with sr20det ....
#1
Registered Member
Thread Starter
Join Date: Apr 2009
Location: Blue Ridge
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
1995 240sx with sr20det ....
Name: Travis
Location: Blue Ridge
Means of contact: phone 5405891646
Price:$6500 obo
Trades:w.e goes point A to B... looking for a daily but also around the same value
civics, integras, other 240s (no s13s unless mint!!!!) acura honda nissan toyota doesnt matter make as long as it isnt a truck! just looking for something different but it must be clean NO BODY KITS NO AFTERMARKET WINGS!!! Im really looking for a mostly oem spec car nothing off the wall, something i can drive everday to work without a fear of mis-hap.. It can aftermarket parts turbo etc. but i need to know its done right.
I would like to be contacted on my phone perferably between the hours of 8 am to 1030 pm. thanks
I have owned this car for about 4 years now and im just looking to get into something different. I drive this car daily to work a hour to a from with no problems And your trade should be able to do this also. I would be willing to throw cash on top if the car is nice ... NO LOW BALLERS!!! you will be ignored
changed all fluids mobil 1 synthetic engine oil, tranny, diff.... 11/24/11 also put all new coil packs and wiring harness for them .... 11/24/11
installed unorthodox pulleys.... 11/18/11
I had this listed awhile back but decided to keep it now it is again up forsale.. looking to sell it or trade it plus cash on my end..
1995 240sx with a s13 black top sr20det
128k on shell 74k on swap
precsion 60 trim pushing 13lbs at low boost
tuned with greddy emanage and profec e01 boost controller
made 295rwhp and 262rwt
greddy front mount and piping
custom top mount exhaust manifold
3 1/4 inch apexi dump tube back to full hks 3 1/2 exhaust
koyo radiator
greddy type s blow off valve
tial 40mm waste gate
eibach progressive springs
tokico struts
17/8 5zigen fn01r-c up front and 17/10 in rear
Brand new kumho ecsta asx's in rear 235 40's and nexxons up front
ka tranni fitted to sr bellhousing
300zx 4 piston calibers and steel braided lines
drilled and slotted rotors
welded diff
nismo oil cap( adds 15 hp)
exeddy cerimic 6 puck clutch
300zx maf
warlboro 250 fuel pump
600cc injectors
viper alarm system
it has a silvia hood and silvia front turn signals.
will send more pics upon request...
The bad it will need paint on the front bumper/ hood .... has dings here and there nothing major
the radio bezel is broken, which is common in 240s of this year
Location: Blue Ridge
Means of contact: phone 5405891646
Price:$6500 obo
Trades:w.e goes point A to B... looking for a daily but also around the same value
civics, integras, other 240s (no s13s unless mint!!!!) acura honda nissan toyota doesnt matter make as long as it isnt a truck! just looking for something different but it must be clean NO BODY KITS NO AFTERMARKET WINGS!!! Im really looking for a mostly oem spec car nothing off the wall, something i can drive everday to work without a fear of mis-hap.. It can aftermarket parts turbo etc. but i need to know its done right.
I would like to be contacted on my phone perferably between the hours of 8 am to 1030 pm. thanks
I have owned this car for about 4 years now and im just looking to get into something different. I drive this car daily to work a hour to a from with no problems And your trade should be able to do this also. I would be willing to throw cash on top if the car is nice ... NO LOW BALLERS!!! you will be ignored
changed all fluids mobil 1 synthetic engine oil, tranny, diff.... 11/24/11 also put all new coil packs and wiring harness for them .... 11/24/11
installed unorthodox pulleys.... 11/18/11
I had this listed awhile back but decided to keep it now it is again up forsale.. looking to sell it or trade it plus cash on my end..
1995 240sx with a s13 black top sr20det
128k on shell 74k on swap
precsion 60 trim pushing 13lbs at low boost
tuned with greddy emanage and profec e01 boost controller
made 295rwhp and 262rwt
greddy front mount and piping
custom top mount exhaust manifold
3 1/4 inch apexi dump tube back to full hks 3 1/2 exhaust
koyo radiator
greddy type s blow off valve
tial 40mm waste gate
eibach progressive springs
tokico struts
17/8 5zigen fn01r-c up front and 17/10 in rear
Brand new kumho ecsta asx's in rear 235 40's and nexxons up front
ka tranni fitted to sr bellhousing
300zx 4 piston calibers and steel braided lines
drilled and slotted rotors
welded diff
nismo oil cap( adds 15 hp)
exeddy cerimic 6 puck clutch
300zx maf
warlboro 250 fuel pump
600cc injectors
viper alarm system
it has a silvia hood and silvia front turn signals.
will send more pics upon request...
The bad it will need paint on the front bumper/ hood .... has dings here and there nothing major
the radio bezel is broken, which is common in 240s of this year
Last edited by t_nasty6; 01-11-2012 at 02:45 PM.
#2
アクセント BITCHES!!!!!!!
Join Date: Jan 2009
Location: ALONG THE EAST COAST
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 240sx with sr20det ....
i have a q45 with work wheels let me know
#3
Registered member
Join Date: Mar 2010
Location: Newport News
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 240sx with sr20det ....
check thread
#4
turbo on 2 wheels
Join Date: Jul 2003
Location: newport news
Posts: 2,364
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 240sx with sr20det ....
Who did all the tuning and stuff on it? Dyno sheets available too? Pm me I have cash if u wanna make a deal.
#5
Registered Member
Thread Starter
Join Date: Apr 2009
Location: Blue Ridge
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered Member
Thread Starter
Join Date: Apr 2009
Location: Blue Ridge
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 240sx with sr20det ....
bump
#8
Registered Member
Thread Starter
Join Date: Apr 2009
Location: Blue Ridge
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered member
Join Date: Mar 2010
Location: Newport News
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 240sx with sr20det ....
nvm, didnt see i posted in here