1995 240sx rolling shell. Deal
#1
Registered Member
Thread Starter
Join Date: May 2008
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
1995 240sx rolling shell. Deal
SOLD ON NICO FOR 700. THANKS TO ANYONE WITH OFFERS. BETTER LUCK NEXT TIME. MODS PLEASE CLOSE
title says it all.
was an auto.
have clutch pedal assembly, as well as a 5 speed brake pedal assembly. And both master cylinders for them.
No crack in dash
Front and rear seats are in decent conditon considering some stains. but no rips.
motor mounts are in.
Stock cd player is still in.
power windows and locks.
HOOD is unlatched in picture(does sit flush)
Do not have Drivers side door panel.
and i removed the carpet not for looks, but because it was dirty beyond cleaning.
Exterior: (I can get more pictures upon request.) Rear end is flawless.
paint is good.
1 ugly *** "gash" in the front bumper.
1 five inch dent in driver door.
Windows are good.
Trunk, hood, and gas cover release work properly,
Body overall is solid
NO rust. kept in storage.
kyb gr2 struts and shocks.
stock springs i believe.
No tranny or motor in car.
I do have 2 ecus for the car.( both for ka, one is auto, and one is manual)
you can use either whatever you decide to put in the car.
I have a wiring harness for the auto setup(you can use with 5spd, just some clips wont be used.) and i also have a s14 SR wire harness(full and uncut)
Also have random little extras i can add on. Or if needed i can take stuff out. such as the seats etc. to make price lower.
It is OBO. not trying to scam anyone, just don't want the shell anymore, Please make reasonable offers or maybe even trades. thank you.
i can be reached by pm or:
rickcosby2008@hotmail.com
757 642 1463
AIM sn JUICEBOXspin
-rick
title says it all.
was an auto.
have clutch pedal assembly, as well as a 5 speed brake pedal assembly. And both master cylinders for them.
No crack in dash
Front and rear seats are in decent conditon considering some stains. but no rips.
motor mounts are in.
Stock cd player is still in.
power windows and locks.
HOOD is unlatched in picture(does sit flush)
Do not have Drivers side door panel.
and i removed the carpet not for looks, but because it was dirty beyond cleaning.
Exterior: (I can get more pictures upon request.) Rear end is flawless.
paint is good.
1 ugly *** "gash" in the front bumper.
1 five inch dent in driver door.
Windows are good.
Trunk, hood, and gas cover release work properly,
Body overall is solid
NO rust. kept in storage.
kyb gr2 struts and shocks.
stock springs i believe.
No tranny or motor in car.
I do have 2 ecus for the car.( both for ka, one is auto, and one is manual)
you can use either whatever you decide to put in the car.
I have a wiring harness for the auto setup(you can use with 5spd, just some clips wont be used.) and i also have a s14 SR wire harness(full and uncut)
Also have random little extras i can add on. Or if needed i can take stuff out. such as the seats etc. to make price lower.
It is OBO. not trying to scam anyone, just don't want the shell anymore, Please make reasonable offers or maybe even trades. thank you.
i can be reached by pm or:
rickcosby2008@hotmail.com
757 642 1463
AIM sn JUICEBOXspin
-rick
Last edited by Kouki KA-T; 02-18-2009 at 09:52 AM. Reason: sold.
#4
Registered Member
Thread Starter
Join Date: May 2008
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1995 240sx rolling shell. Deal
not sure. i know you asked because of the driveshaft i suppose. i had looked into it, it doesn't matter. abs does not change anything on the length of the tranny. or where the diff sits.