DaltonB

Name: Dalton Burns
Location: Williamsburg
Means of contact: Text: 757-810-6340
Price: $4000obo

Description: I started this project with one car and slowly ended up with three, The engine is built but won't run, i'm in process of trying to take off head to check everything, i do have a spare built engine on the side to use for parts if needed. It has a Garrett GT30 Turbo, Tien adjustable suspention, Apexi N1 exhaust, Innovate Wideband Sensor, and more.
*update* sorry to bring back the dead but, i lost all pics on comp so easiest way for me!,
1. Car has new engine in it

had a guy help me a bit and alot of the wiring has been fixed in the car. he said if the wiring is finished all that is left is replacing hoses. I already have a car in mind i wish to purchase as i need a car in order to drive daily 50+ miles for school and well, lets face it, finishing this laser wouldn't get me the car for that. This car is a good project car and i've seen 4g63 cars up in the 8s, (if built properly ofc)
PS: Has Wastegate now (not pictured) and fpr replaced with Aeromotive 1000

When purchased ill throw in the old head (needs new valves) and basically every little thing i have on this car, i can either tow to you, or you can come get it yourself, if i tow to you, serious purchases only, diesil isn't cheap.

*UPDATE 08-04-11*
Info i know on car: Engine when everything is put together, will run, only problem the car has had was the coolant hose going to turbo cracked (rubber hose) The car doesn't have what i would call a "Clean" interior, but it has alot under the hood. I know again i'm bringing this back, which i apologize for, but, the car has to be sold within a week if at all possible. Cash or trades accepted, trades i'd love = EG or EK Civic Hatch | EM1 Civic | 300z | 240sx | V8's, Manual's please, automatics make me sleepy haha. I'm a nice / reasonable guy and i'm desperate to sell this car!

Pictures:

Sun Wukong

LAZARS!!!! are rare but not gold holy high price good luck with sell <3

1sickmcx

+1

delslow17

Actually got to ride in one of these last week, it was awesome lol. Bump for u man

DaltonB

Ya removed the head and there is some damage to piston and valves, but, like i said, i have a completly built engine to replace it haha. w/ BC 280 Cams / 9:1 Compressions JE Pistons / Eagle Rods. just needs to be swapped which if bought soon will be included aswell. Mods of the car as i remember include:
A'Pexi N1 Exhaust + Downpipe
Garrett GT30 Turbo
Ported Evo3 Manifold
Ported Intake Manifold
Innovate LC-1 Wideband
Manual Boost Control
KYB Shocks
Tein Adujustable Suspension
Walbro 255LPH Fuel Pump
Aeromotive 1000 Fuel Pressure Regulator
Viscious 4-Bolt Rear LSD
880cc Fuel Injectors
Ported Stock Fuel Rail (I'll include an aftermarket one too if you would like)
Spec Stage 3 Clutch
HKS SSQ BOV
FMIC
Mishimoto Radiator
Custom Intercooler Piping
Ostrich 2.0
EPROM ECU

The head that was removed has Brian Crower Valves / BC 272 Cams, was removed b/c 6 of the valves were broken but, i'll include the head w/ the car if you like

Additional Stuff i have:
Ported 2g Intake Manifold
Stock 1g Intake Manifold
2g Throttle body
I have another Transmission / Transfer Case
1g BOV

zombie361

Its a nice build but good god the price is steep

DaltonB

WEll its obo so feel free to make an offer lol, i just put that price b/c that owuld be what i would consider the "Perfect" Price as in, i'd would have no regrets haha. but i'm open for offers! =]

DaltonB

Price Drop to $5000, i know its not a big drop but i really have a price b/c the forums say i need one haha, i'm really looking for trades, but price is incase someone would rather buy than trade, feel free to text me, i'm usually by my phone from time i wake up till about 3am haha

DaltonB

bump

zombie361

You cant bump it more than once a day unless your Patron