1988 rx7
#1
1988 rx7, kie office,nardi,re-amemiya
1988 Mazda RX7 GXL
Location:
-cville
Motor:
-s5 street port
-all egr/emissions removed
-new plugs
-RE Amemiya oil cap
-single exhaust. 2.5" straight pipe from the manifold back, going to a greddy muffler. Very loud
-Electric fan
-Battery relocated behind seat
- light weight flywheel, six puck act clutch and s5 t2 trans.
-alum radiator
-msd wires
-tci oil cooler with an fittings and stainless braided lines
Chassis:
-Kei Office Coilovers, amazing suspension, very stiff. right rear coilover leaks
-DTSS Eliminators
-Polyurethane Bushings
-Rear strut bar
-STOCK LSD, there is a roar in the rear, i cant tell if its the tires rubbing or if the rear is howling
-4 piston calipers
-solid diff mount
-very low
Exterior:
-S4.5 Shine Auto Front Lip
-the only rust is a very small patch of surface behind the rear passenger wheel well but the body is kinda rough
-Needs paint, there is some chipping in several places
-Needs a drivers side taillight. it has S4 tails
-S5 mirrors
Interior:
-All power
-Power sunroof, slow but still works
-No cracks in dash but some of the plastic parts are broke up
- Nardi Classic steering wheel, momo hub
Wheels:
--17X9 +0 Hotwheels Sixty Eight by KMC
tires need to be replaced
-the bad
i installed the swap and got everything done but the car has some sort of wiring issue. i took out some wiring that was under the console that was not factory and watever i did i fucked up! it probly needs a replacement harness but idk. im just tired of messing with the car and want to move on to other projects.
-price
1000.00 firm and no less
cant figure out how to post pics so ive attached some pics of when the previous owner had the car
i can text some pics though if interested 434-326-2220
Location:
-cville
Motor:
-s5 street port
-all egr/emissions removed
-new plugs
-RE Amemiya oil cap
-single exhaust. 2.5" straight pipe from the manifold back, going to a greddy muffler. Very loud
-Electric fan
-Battery relocated behind seat
- light weight flywheel, six puck act clutch and s5 t2 trans.
-alum radiator
-msd wires
-tci oil cooler with an fittings and stainless braided lines
Chassis:
-Kei Office Coilovers, amazing suspension, very stiff. right rear coilover leaks
-DTSS Eliminators
-Polyurethane Bushings
-Rear strut bar
-STOCK LSD, there is a roar in the rear, i cant tell if its the tires rubbing or if the rear is howling
-4 piston calipers
-solid diff mount
-very low
Exterior:
-S4.5 Shine Auto Front Lip
-the only rust is a very small patch of surface behind the rear passenger wheel well but the body is kinda rough
-Needs paint, there is some chipping in several places
-Needs a drivers side taillight. it has S4 tails
-S5 mirrors
Interior:
-All power
-Power sunroof, slow but still works
-No cracks in dash but some of the plastic parts are broke up
- Nardi Classic steering wheel, momo hub
Wheels:
--17X9 +0 Hotwheels Sixty Eight by KMC
tires need to be replaced
-the bad
i installed the swap and got everything done but the car has some sort of wiring issue. i took out some wiring that was under the console that was not factory and watever i did i fucked up! it probly needs a replacement harness but idk. im just tired of messing with the car and want to move on to other projects.
-price
1000.00 firm and no less
cant figure out how to post pics so ive attached some pics of when the previous owner had the car
i can text some pics though if interested 434-326-2220
Last edited by Mr 4SPEED; 12-25-2010 at 03:50 PM.
#2
Registered Member
Join Date: Jun 2006
Location: Norfolk
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1988 rx7
Where are you located and how much if you take the motor, trans, and turbo stuff out of the deal?
#3
Re: 1988 rx7
the cars located in cville, ide rather see the motor and everything go with the car. i wouldnt have any use for them
Last edited by Mr 4SPEED; 08-16-2010 at 12:31 PM.
#8
has a huge dong
Join Date: Dec 2004
Location: v.b.
Posts: 5,654
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1988 rx7
Bump for my old project. This.car is so solid, and definetly has an amazing stance:Thup:
#9
Re: 1988 rx7
thanks josh, i never thought i would part with it especially not this quick. u never know i may just end up keeping it because theres so much ide love to do to it