dink327 ep3

Name: Dinkel
Location: Pittsburgh
Means of contact: 724-396-9375 is my cell. Dont PM me! i hardly ever get on here!
Price: $9,000

Car was originally from the 757 area. I lived there for 2 years and now moved back home.


SPECS:
2004 Honda Civic Si EP3
104k ish on body
5xxxx on motor
plenty of new parts and mods done right!

Going to regret doing this... Butttttttt up for sale is my k24a2 tsx swapped 2004 ep3. I have probably close to 15k in parts alone in the car, but its time to grow up and move on. Ive had the car for 3 years and it is originally a southern car. I bought the car with something around 40k miles on it. Currently sitting with 103xxx on it. Motor is out of a 2004 acura tsx with around 50k on it. Receipt from LKQ available. 6 speed tranny out of a 04 rsx type s.

Motor:
2004 k24a2 Acura Tsx motor with ~50k. Will do the math on exact mileage when i find the receipt.
2004 Acura rsx type s 6 speed transmission
Hasport 94a solid motor mount kit
Injen intake will most likely be the intake used
DC raceheader
Competition stage 4 6 puck clutch & ACT prolite flywheel (less then 100 miles)
Hondata kpro-(cookie cutter hondata tune but runs goooooood)
Ebay catback installed (sounds like balls)
3" kteller stainless piping kit. vibrant resonator with a vibrant muffler (not installed brand new)
Brand new em2 clutch master cylinder
Brand New OEM clutch slave cylinder
Discontinued buddy club short shifter


Suspension:
D2 32 way dampening coilovers less then 1k miles
27 mm hotchkis rear sway bar with brand new bushings and adjustable hotchkis endlinks up front too (including endlinks)
brand new axles (lifetime warranty)
brand new wicked front and rear camber kits
05/06 rsx type s wheels no rash, just a few scratches but nothing major
Tires are brand new hankook. zero miles.
Progress subframe brace
omni power lower control arms

Exterior:
taffeta white Paint is pretty clean. Couple dings and dents but nothing major
Type r replica lip that is cracked and since im lowered i just stitched it up.
type r rep rear lip



Issues:
Interior is a little beat up. Tiny hole in driver side carpet from not having floor mats. Just buy floormats and your mint.
Interior door handle is broke off, (not the piece that opens the door, just the handle connected on the door panel) could be fixed or a new door panel. doesnt bother me
Tiny hole on the steering wheel (pictures of all those available upon request)


I know there is plenty of stuff im missing, but you get the point. No cheap parts at all (other then exhaust) and no corners were cut on anything. Car pulls veryyyyyyy hard and would be even better if retuned with the 3"exhaust.


Looking to get $9000 obo. cash talks.

Side note: CAR HAS BEEN RAISED AND IS ONLY LOWERED ABOUT 2" FROM STOCK NOW. JUST MORE REASONABLE AND WANTED TO GET A PERFECT ALIGNMENT FOR THE NEW TIRES. I DO NOT DRIVE THE CAR. I HAVE A DAILY AND THIS CAR DOESN'T MOVE. ALSO PASSWORDJDM STUFF IN THE BAY PICTURE ARE NOT INCLUDED.

ImKrue

Great price. Is it running on a stock ecu from the TL? Or tuned. If its tuned what kinda power did it make.

Mau5head

This is VADRIVEN NOT PADRIVEN.....

Mau5head

If it were running a TL ECU it wouldn't have a K-series pos in it. It would have a J-series. ......FYI

dink327 ep3

Running on Kpro with just the hondata basemap for the k24a2 with a raceheader.

dink327 ep3

Meh i was member here, and i know a lot of people in va and lived there for 2 years. I have been trying to sell this for a bit. Just trying to get the word out there! Having 2 car payments plus rent and school loans isn't fun.