Honda Civic B-series
#1
Honda Civic B-series
Name: JRK
Location: 301
Means of contact: PM
Price: $5000 OBO Price is very neg.
1995 Honda Civic coupe. I am the second owner first owner was an older lady that took very good care of it. I bought the car completely stock, so all work was done by me. Tech owned , i do an oil change every 3000 miles. Car needs a fender and a paintjob but body is straight, no honda rust anywhere and no serious dents. interior is all there and in very good condition. . Dont have many pictures right now but will take and send more to serious inquirers. Thank you
Car has remote start!
Exterior
-Car is black
-Gold 16" rota slipstreams
-205/40/16 kumho ecsta ast
-20% window tint
-Ground control coils
-Front bumper is flat black because i replaced it a while back, holes cut out for fog lights just never got around to doing it
-Needs a windshield
Interior
-Charcoal interior
-Has all original interior pieces just missing floor mats
-Cluster has been changed over to a SI cluster
-MSD pro digital shift light mounted in front of cluster, light has digital rpm readout and shift by gear
-Carpet is in great condition, black
Engine/Exhaust/Drivertrain
-LS/vtec swap done about 20k ago
-LS bottom end out of a 93 acura integra that I myself owned
-Cylinder head out of a 1995 Acura integra GSR
-Cylinder head was completely redone when i put the motor together, 3 angle valve job and all new valve seals (done by bill at advance machine shop in waldorf, md)
-Bottom end stock internals but ACL bearing , but still reads good compression all the way accross and can prove that on spot
-Hytech4-1 header with 3" outlet
-2.5" exhaust all the way back with no converter
-Skunk2 pro series intake manifold with blox 68mm throttle body
-Inline pro fuel rail
-Type R injectors
-Walbro 255lph fuel pump
-Inline Pro rear torque mount
-LS trans
-Comp stg4 6 puck
-sKUNK2 S/S
-Blox 440 gram KNob
Pictures:
[ATTACH=CONFIG]147937[/ATTACH][ATTACH=CONFIG]147938[/ATTACH]
Location: 301
Means of contact: PM
Price: $5000 OBO Price is very neg.
1995 Honda Civic coupe. I am the second owner first owner was an older lady that took very good care of it. I bought the car completely stock, so all work was done by me. Tech owned , i do an oil change every 3000 miles. Car needs a fender and a paintjob but body is straight, no honda rust anywhere and no serious dents. interior is all there and in very good condition. . Dont have many pictures right now but will take and send more to serious inquirers. Thank you
Car has remote start!
Exterior
-Car is black
-Gold 16" rota slipstreams
-205/40/16 kumho ecsta ast
-20% window tint
-Ground control coils
-Front bumper is flat black because i replaced it a while back, holes cut out for fog lights just never got around to doing it
-Needs a windshield
Interior
-Charcoal interior
-Has all original interior pieces just missing floor mats
-Cluster has been changed over to a SI cluster
-MSD pro digital shift light mounted in front of cluster, light has digital rpm readout and shift by gear
-Carpet is in great condition, black
Engine/Exhaust/Drivertrain
-LS/vtec swap done about 20k ago
-LS bottom end out of a 93 acura integra that I myself owned
-Cylinder head out of a 1995 Acura integra GSR
-Cylinder head was completely redone when i put the motor together, 3 angle valve job and all new valve seals (done by bill at advance machine shop in waldorf, md)
-Bottom end stock internals but ACL bearing , but still reads good compression all the way accross and can prove that on spot
-Hytech4-1 header with 3" outlet
-2.5" exhaust all the way back with no converter
-Skunk2 pro series intake manifold with blox 68mm throttle body
-Inline pro fuel rail
-Type R injectors
-Walbro 255lph fuel pump
-Inline Pro rear torque mount
-LS trans
-Comp stg4 6 puck
-sKUNK2 S/S
-Blox 440 gram KNob
Pictures:
[ATTACH=CONFIG]147937[/ATTACH][ATTACH=CONFIG]147938[/ATTACH]
Last edited by JRK; 07-20-2012 at 11:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
slowEK9
Import - ASIA
38
01-10-2009 02:12 PM