700hp S2000
#1
Registered Member
Thread Starter
Join Date: Apr 2010
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
700hp S2000
Nick
Suffolk
PM or 7576219613
$28k OBO
Looking to possibly sell this car. It is an 05 Silverstone AP2 s2000. Currently has 89k on the clock. Motor has less than 10k miles on it. It was tuned on 110. Dyno sheet attached with numbers before installation of new fuel rail. Ran out of fuel up top on stock fuel rail. I have had my fun with it and I don't drive it as much as I would like anymore. I would like to see someone else enjoy it. The price is a little high i know but it is OBO. It is negotiable, but keep your lowball offers to yourself.
Engine:
-Sleeved bottom
-Wiseco 9.0:1 pistons
- BC H beams
- ACL rod bearings
- Custom wrist pins from Precision Products Performance
- ARP head studs
- Ferrea valves
- Ferrea springs and retainers
- Ferrea roller rockers
- ID1000 injectors
- Walboro 455lph fuel pump
- Inline Pro Fuel Rail
- Mishimoto radiator
- (2) 10" slim fans
- Hasport mounts
- Spoon drain plugs, oil cap, and reservoir covers
- Hondata Intake Manifold Gasket
**All machine work done at Abacus Racing in VB.
**Engine assembly by Shad at Accuracy Automotive
**Fab work done by Shawn at Rameybuilt
**Tuned by Shad at Accuracy Automotive
Turbo Kit:
- Full Race Twin-scroll Manifold
- Precision 6266BB
- (2) 38mm Tial waste gates
- Tial BOV
- Precision 600hp Intercooler
- Hondata 4bar map sensor
- AEM boost controller
- AEM V2 EMS
- Rameybuilt custom IC piping, down pipe, and dump tubes out of the hood
- Comp stage 5 clutch (throwout bearing was replaced with it)
- Rameybuilt custom catch can
Exterior:
- BC Racing BR type coilovers
- Volk RE-30s 17x9 +54 on all 4 corners
- Nitto NT05s 255/45r and 235/40f
- OEM front lip
- CR side markers
- OEM vented hood
Interior:
- CR floor mats
- CR seats
- Personal Grinta 330 Black Suede/Yellow Stitching
- NRG quick release
- AEM wideband (bad sensor)
- AEM boost gauge
I'm sure I'm missing other items. If you have any questions feel free to PM, text, or call.
[ATTACH=CONFIG]180969[/ATTACH][ATTACH=CONFIG]180970[/ATTACH][ATTACH=CONFIG]180971[/ATTACH][ATTACH=CONFIG]180972[/ATTACH][ATTACH=CONFIG]180973[/ATTACH][ATTACH=CONFIG]180974[/ATTACH][ATTACH=CONFIG]180975[/ATTACH][ATTACH=CONFIG]180976[/ATTACH[ATTACH=CONFIG]181116[/ATTACH]
Suffolk
PM or 7576219613
$28k OBO
Looking to possibly sell this car. It is an 05 Silverstone AP2 s2000. Currently has 89k on the clock. Motor has less than 10k miles on it. It was tuned on 110. Dyno sheet attached with numbers before installation of new fuel rail. Ran out of fuel up top on stock fuel rail. I have had my fun with it and I don't drive it as much as I would like anymore. I would like to see someone else enjoy it. The price is a little high i know but it is OBO. It is negotiable, but keep your lowball offers to yourself.
Engine:
-Sleeved bottom
-Wiseco 9.0:1 pistons
- BC H beams
- ACL rod bearings
- Custom wrist pins from Precision Products Performance
- ARP head studs
- Ferrea valves
- Ferrea springs and retainers
- Ferrea roller rockers
- ID1000 injectors
- Walboro 455lph fuel pump
- Inline Pro Fuel Rail
- Mishimoto radiator
- (2) 10" slim fans
- Hasport mounts
- Spoon drain plugs, oil cap, and reservoir covers
- Hondata Intake Manifold Gasket
**All machine work done at Abacus Racing in VB.
**Engine assembly by Shad at Accuracy Automotive
**Fab work done by Shawn at Rameybuilt
**Tuned by Shad at Accuracy Automotive
Turbo Kit:
- Full Race Twin-scroll Manifold
- Precision 6266BB
- (2) 38mm Tial waste gates
- Tial BOV
- Precision 600hp Intercooler
- Hondata 4bar map sensor
- AEM boost controller
- AEM V2 EMS
- Rameybuilt custom IC piping, down pipe, and dump tubes out of the hood
- Comp stage 5 clutch (throwout bearing was replaced with it)
- Rameybuilt custom catch can
Exterior:
- BC Racing BR type coilovers
- Volk RE-30s 17x9 +54 on all 4 corners
- Nitto NT05s 255/45r and 235/40f
- OEM front lip
- CR side markers
- OEM vented hood
Interior:
- CR floor mats
- CR seats
- Personal Grinta 330 Black Suede/Yellow Stitching
- NRG quick release
- AEM wideband (bad sensor)
- AEM boost gauge
I'm sure I'm missing other items. If you have any questions feel free to PM, text, or call.
[ATTACH=CONFIG]180969[/ATTACH][ATTACH=CONFIG]180970[/ATTACH][ATTACH=CONFIG]180971[/ATTACH][ATTACH=CONFIG]180972[/ATTACH][ATTACH=CONFIG]180973[/ATTACH][ATTACH=CONFIG]180974[/ATTACH][ATTACH=CONFIG]180975[/ATTACH][ATTACH=CONFIG]180976[/ATTACH[ATTACH=CONFIG]181116[/ATTACH]
Last edited by s2k1621; 07-12-2014 at 02:52 PM.
#2
Re: 700hp S2000
Any chance you'd sell the CR seats? Could swap my '04 seats (pass in great shape, driver has bolster wear) + cash?
#3
Registered Member
Thread Starter
Join Date: Apr 2010
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
Re: 700hp S2000
PM me.
#4
DUKE BLUE DEVILS
Join Date: Nov 2002
Location: Yorktown
Posts: 6,075
Likes: 0
Received 0 Likes
on
0 Posts
Re: 700hp S2000
Can we get some better pics for $30k? Damn, son. Stop being lazy. Haha...
#5
Re: 700hp S2000
Bump for you man this car looks good. I think I saw this at Cruisin Weekend in OCMD back in may. Definitely sounded healthy.
#6
Re: 700hp S2000
Having a dyno sheet showing 700hp would benefit this thread a ton. Looks like a solid build.
#7
Registered Member
Thread Starter
Join Date: Apr 2010
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
Re: 700hp S2000
dyno sheet added. ttt
#8
DUKE BLUE DEVILS
Join Date: Nov 2002
Location: Yorktown
Posts: 6,075
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered member
Join Date: Mar 2009
Location: Richmond
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Re: 700hp S2000
thats 600 hp but for 30k dang
#10
BACK IN A G8
Join Date: Jun 2004
Location: LEGION OF DOOM
Posts: 4,028
Likes: 0
Received 0 Likes
on
0 Posts
Re: 700hp S2000
its a solid car...will vouch