1999 Honda Prelude
#1
Registered Member
Thread Starter
Join Date: Mar 2010
Location: Va Beach
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
1999 Honda Prelude
Name- Brandon
Location- Glen Burnie, MD
Price- $5000 obo
contact- pm or email brandon.collins8@gmail.com
listing this for a friend. if you have any questions just let me know.
Shes a 5 speed 99 ficus green prelude with ~127,XXX on the body and ~30K on the engine. Car has the following:
H22 block- align honed, decked
88mm Darton Sleeves
H23 Crank Micropolished/Balanced
Clevite main/rod bearings
Eagle H23 Rods with ARP bolts
Custom 88mm 9:1 CP pistons
H22 oil squirters
H22 Head
Ferrea Valves
Ferrea Springs/Retainers
Mild port/polish
Stock H22 cams
UGR adjustable cam gears
Cometic head gasket
ARP head studs
Greddy exhaust
dc sport header
aem short ram intake
motor was built for turbo but was never boosted.
ACT 4 puck unsprung clutch
ACT xtreme pressure plate
Fidanza flywheel
transmission was professionally rebuilt less than 10k miles ago
Skunk 2 coilovers
Koni yellow struts - (not on car but will/can come with it)
Spoon rear strut bar
VIS carbon fiber hood - NEEDS TO BE REPLACED
VIS carbon fiber trunk - Needs to be refinished
Interior is in great shape and has a nice Sony headunit. The body of the car is in pretty good condition; very small dent by passenger door and a newish dent on the drivers side by the trunk due to the lovely snow plow (this may be fixed soon). Car needs some TLC, between work and school, I don't have the time or money for it anymore. Engine bay needs a good cleaning. Car runs great and is ready to go.. $5,000obo
Location- Glen Burnie, MD
Price- $5000 obo
contact- pm or email brandon.collins8@gmail.com
listing this for a friend. if you have any questions just let me know.
Shes a 5 speed 99 ficus green prelude with ~127,XXX on the body and ~30K on the engine. Car has the following:
H22 block- align honed, decked
88mm Darton Sleeves
H23 Crank Micropolished/Balanced
Clevite main/rod bearings
Eagle H23 Rods with ARP bolts
Custom 88mm 9:1 CP pistons
H22 oil squirters
H22 Head
Ferrea Valves
Ferrea Springs/Retainers
Mild port/polish
Stock H22 cams
UGR adjustable cam gears
Cometic head gasket
ARP head studs
Greddy exhaust
dc sport header
aem short ram intake
motor was built for turbo but was never boosted.
ACT 4 puck unsprung clutch
ACT xtreme pressure plate
Fidanza flywheel
transmission was professionally rebuilt less than 10k miles ago
Skunk 2 coilovers
Koni yellow struts - (not on car but will/can come with it)
Spoon rear strut bar
VIS carbon fiber hood - NEEDS TO BE REPLACED
VIS carbon fiber trunk - Needs to be refinished
Interior is in great shape and has a nice Sony headunit. The body of the car is in pretty good condition; very small dent by passenger door and a newish dent on the drivers side by the trunk due to the lovely snow plow (this may be fixed soon). Car needs some TLC, between work and school, I don't have the time or money for it anymore. Engine bay needs a good cleaning. Car runs great and is ready to go.. $5,000obo
#3
Registered Member
Thread Starter
Join Date: Mar 2010
Location: Va Beach
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1999 Honda Prelude
thanks. i would keep it too but i'm just posting for a friend who no longer has interest and would rather just have the money. perfect car for a nice turbo build
#5
Registered Member
Thread Starter
Join Date: Mar 2010
Location: Va Beach
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1999 Honda Prelude
all the machine work was done by Justice Racing Engines in Winchester, VA. I did the assembly myself. I'll see if I still have the receipts from the machine work.