1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
06-17-2010, 12:56 PM
#1
Registered Member
Thread Starter
Join Date: Jan 2009
Location: Ogikubo,Japan
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
1996 Integra GS-R Turbo Inline Pro Cold A/C and PS
Contact: PM or Email@ turbointegradc2@tmo.blackberry.net
Location: Central Virginia
FOR SALE: No Trades!!!!!!!! Unless you have a Stock EP3 or Stock DC5 or 03+ Accord 100k +Mileage is ok or any Obd1 or Obd2 RHD Hondas. Must have A/C again mileage above 100k is Ok.
-1996 Acura Integra GS-R 170k On Chassis
-6,587 On Engine
-424 miles on Turbo Setup
-Cold A/C and Powersteering (Super Cold A/C)
-Hennessey Tuned 14psi
-Setup is for DD!!!!!!!!
Engine:
-B16A Block and Head
-P73 Pistons (New OEM)
-P73 Crank (Polished)
-P73 Rods (New Oem)
-Honda Main/Rod Bearings
-Honda Headgasket
-CTR Cams
-CTR Valve Springs Retainers
-New Head Bolts
-All Honda Gaskets/Seals/Thermo
-Blox Cam Seal
-Honda Timing Belt/Water Pump
-RC 750cc Injectors
-Golden Eagle Pro Fuel Rail Black
-Stainless Fuel Line
-Omni 3 Bar
-New Cap/Rotor
-NGK Wires
-BKR7E
-Inline Pro t3/t4 Manifold
-Tial 38mm Wastegate Black
-Earls Oil feed w/restrictor
-Blox Oil sandwich plate
-T3/T4 Turbonetics 63-1 Turbo Polished
-Fab'd Stainless downpipe
-Fab'd Dumptube
-Precision Couplers/T-Bolts
-Moroso Oil Pan/Race Pickup
-HKS SSQV REAL Limited
-Inline Pro Charge Pipe
-Mishimoto Radiator ( Full Size) With Purple ICe Inside
-Samco Radiator Hoses
-Inline Pro Boost Controller
-32x12x3 FMIC
-Invidia test pipe
-Yonaka Exhaust ( Quiet)
-Walbro 255
-Hasport Mount
-Tuned On Chrome
VERY VERY Conservative, 500kilometers to a take of gas.
OIL HAS BEEN CHANGED EVERY 1K SINCE SWAP IN DEC. USING MOBIL 1 AND BG MOA, HONDA FILTER
and New Plugs Every Oil change.
Transmission:
-S80 with GSR Gears (Put together in December) Great For Street
-Fidanza Flywheel
-Stage 5 Spec Clutch 4 puck disc
-New OE Axles
-Cusco Fluid w/Modifier
-New Master Cylinder/Slave Cylinder
-Password Shifter Bushings
-Honda ITR short Shifter
NO GRINDS/NO HARD SHIFTS/NO RACING
Exterior:
-Spoon Carbon Lip
-NRG Carbon Canards
-Spoon Mirrors
-2000 ITR Tailights
-Work Equip 03 w/ Falken Ziex 912
-Baer Rotors
-Hawk Pads
-Blox Gold LCA
-Beaks Gold Tie Bar
-JIC Coilovers TITANIUM
-Full Race Traction Bars
-Blackworks upper control arms
-12k HID
-6k Yellow Fogs
-10% tint around
* Also has New Inner and outer tie rods and boots*
Note: Car Looks Great Very Shiny but has Many small scatches and dents but the wheels take your focus off that. Has Been painted before. Under the car is super clean. Needs 3" Exhaust to make more power.
Interior:
-Jdm GS-R Cluster
-ITR Boot and Knob
-Rear C-Piller
9/10 Brown Cloth Interior Seats have No damage
Everything is Super Clean In the Engine and outside Scott Hennessey will tell you.
Asking $7k OBO As-Is I don't drive it, Have 3 cars.
The Cars Runs Perfect!
This car is not setup to Drag, Street Only
Setup is custom for A/C
Will Include all reciepts I have which is a stack of 100 or more.
Location: Central Virginia
FOR SALE: No Trades!!!!!!!! Unless you have a Stock EP3 or Stock DC5 or 03+ Accord 100k +Mileage is ok or any Obd1 or Obd2 RHD Hondas. Must have A/C again mileage above 100k is Ok.
-1996 Acura Integra GS-R 170k On Chassis
-6,587 On Engine
-424 miles on Turbo Setup
-Cold A/C and Powersteering (Super Cold A/C)
-Hennessey Tuned 14psi
-Setup is for DD!!!!!!!!
Engine:
-B16A Block and Head
-P73 Pistons (New OEM)
-P73 Crank (Polished)
-P73 Rods (New Oem)
-Honda Main/Rod Bearings
-Honda Headgasket
-CTR Cams
-CTR Valve Springs Retainers
-New Head Bolts
-All Honda Gaskets/Seals/Thermo
-Blox Cam Seal
-Honda Timing Belt/Water Pump
-RC 750cc Injectors
-Golden Eagle Pro Fuel Rail Black
-Stainless Fuel Line
-Omni 3 Bar
-New Cap/Rotor
-NGK Wires
-BKR7E
-Inline Pro t3/t4 Manifold
-Tial 38mm Wastegate Black
-Earls Oil feed w/restrictor
-Blox Oil sandwich plate
-T3/T4 Turbonetics 63-1 Turbo Polished
-Fab'd Stainless downpipe
-Fab'd Dumptube
-Precision Couplers/T-Bolts
-Moroso Oil Pan/Race Pickup
-HKS SSQV REAL Limited
-Inline Pro Charge Pipe
-Mishimoto Radiator ( Full Size) With Purple ICe Inside
-Samco Radiator Hoses
-Inline Pro Boost Controller
-32x12x3 FMIC
-Invidia test pipe
-Yonaka Exhaust ( Quiet)
-Walbro 255
-Hasport Mount
-Tuned On Chrome
VERY VERY Conservative, 500kilometers to a take of gas.
OIL HAS BEEN CHANGED EVERY 1K SINCE SWAP IN DEC. USING MOBIL 1 AND BG MOA, HONDA FILTER
and New Plugs Every Oil change.
Transmission:
-S80 with GSR Gears (Put together in December) Great For Street
-Fidanza Flywheel
-Stage 5 Spec Clutch 4 puck disc
-New OE Axles
-Cusco Fluid w/Modifier
-New Master Cylinder/Slave Cylinder
-Password Shifter Bushings
-Honda ITR short Shifter
NO GRINDS/NO HARD SHIFTS/NO RACING
Exterior:
-Spoon Carbon Lip
-NRG Carbon Canards
-Spoon Mirrors
-2000 ITR Tailights
-Work Equip 03 w/ Falken Ziex 912
-Baer Rotors
-Hawk Pads
-Blox Gold LCA
-Beaks Gold Tie Bar
-JIC Coilovers TITANIUM
-Full Race Traction Bars
-Blackworks upper control arms
-12k HID
-6k Yellow Fogs
-10% tint around
* Also has New Inner and outer tie rods and boots*
Note: Car Looks Great Very Shiny but has Many small scatches and dents but the wheels take your focus off that. Has Been painted before. Under the car is super clean. Needs 3" Exhaust to make more power.
Interior:
-Jdm GS-R Cluster
-ITR Boot and Knob
-Rear C-Piller
9/10 Brown Cloth Interior Seats have No damage
Everything is Super Clean In the Engine and outside Scott Hennessey will tell you.
Asking $7k OBO As-Is I don't drive it, Have 3 cars.
The Cars Runs Perfect!
This car is not setup to Drag, Street Only
Setup is custom for A/C
Will Include all reciepts I have which is a stack of 100 or more.
Last edited by Tokyosundeimasu; 06-20-2010 at 01:20 PM. Reason: FS/FT
06-18-2010, 03:32 AM
#2
HATE USERNAME
Join Date: Oct 2009
Location: Richmond, Va
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
Check thread for my RHD Integra. Let me know.
06-18-2010, 06:29 AM
#3
Banned
Join Date: Dec 2009
Location: Richmond Va
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
So what exactly is Full-Race off this entire setup? Reciepts for motor work done to the engine?
06-18-2010, 07:23 AM
#4
Registered Member
Thread Starter
Join Date: Jan 2009
Location: Ogikubo,Japan
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
Chris, I have every reciept from bolts to pistons to machine shop to the car. Its all here, Each and every one.
Full Race Traction Bars Only
Full Race Traction Bars Only
06-18-2010, 10:39 AM
#5
Registered member
Join Date: Apr 2008
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
whats your lowest cash price for this weekend?
06-18-2010, 11:07 AM
#6
Registered member
Join Date: Feb 2009
Location: richmond va
Posts: 2,527
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
Pmd
06-18-2010, 09:24 PM
#7
Registered member
Join Date: Mar 2008
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
pm'd
06-19-2010, 07:58 AM
#8
Registered Member
Thread Starter
Join Date: Jan 2009
Location: Ogikubo,Japan
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
pm'd
06-20-2010, 11:24 AM
#9
Registered Member
Thread Starter
Join Date: Jan 2009
Location: Ogikubo,Japan
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Full Race/Inline Pro A/C and PS
Bump added more photos
06-20-2010, 01:21 PM
#10
Registered Member
Thread Starter
Join Date: Jan 2009
Location: Ogikubo,Japan
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Integra GS-R Turbo Inline Pro Cold A/C and PS
FS/FT