VQ35DE swap for S13
#1
SAY IT WITCHA CHEST!
Thread Starter
Join Date: Mar 2007
Location: Outer Space
Posts: 3,949
Likes: 0
Received 0 Likes
on
0 Posts
VQ35DE swap for S13
Name: Corey
Location: Roanoke, Va
Means of contact: PM
Price: $2800 OBO.
Description:
Okay people, I REALLY need to get this S13 VQ swap sold!!!
$2800 or best REASONABLE offer. Originally swapped by Justin Collins, previously owned by Justin Moore. Was told that the swap was pulled from an 04 Z with less than 50k miles. Current mileage would probably be in the 65k range.
Swap is 90% complete, needing only P/S lines (SOHC KA or Chase Bays), 5 minor bolts missing from the timing cover (trying to find replacements), and radiator hoses that will work with an SR radiator. Swap Includes motor, trans w/shortened shifter housing, custom solid motor and trans mounts, OEM headers clearanced for the steering shaft, test pipes, y-pipe, one piece drive shaft, 350z gas pedal for the drive by wire, UpRev tuned ECU with NATS removed, custom wiring harness with flying leads, key/ignition cylinder, Gauge cluster from the Z the motor came from, new clutch slave cyl, new intake manifold gasket, etc...Now including brand new ISIS aluminum SR radiator.
Swap could be used in an S14 as well, but the driveshaft will most likely need to be lengthened.
$2800 or best reasonable offer. Im already losing my ass on the swap, but I need to finish my Z ASAP! Located in Roanoke, Va.
Pictures:
Location: Roanoke, Va
Means of contact: PM
Price: $2800 OBO.
Description:
Okay people, I REALLY need to get this S13 VQ swap sold!!!
$2800 or best REASONABLE offer. Originally swapped by Justin Collins, previously owned by Justin Moore. Was told that the swap was pulled from an 04 Z with less than 50k miles. Current mileage would probably be in the 65k range.
Swap is 90% complete, needing only P/S lines (SOHC KA or Chase Bays), 5 minor bolts missing from the timing cover (trying to find replacements), and radiator hoses that will work with an SR radiator. Swap Includes motor, trans w/shortened shifter housing, custom solid motor and trans mounts, OEM headers clearanced for the steering shaft, test pipes, y-pipe, one piece drive shaft, 350z gas pedal for the drive by wire, UpRev tuned ECU with NATS removed, custom wiring harness with flying leads, key/ignition cylinder, Gauge cluster from the Z the motor came from, new clutch slave cyl, new intake manifold gasket, etc...Now including brand new ISIS aluminum SR radiator.
Swap could be used in an S14 as well, but the driveshaft will most likely need to be lengthened.
$2800 or best reasonable offer. Im already losing my ass on the swap, but I need to finish my Z ASAP! Located in Roanoke, Va.
Pictures:
#2
SAY IT WITCHA CHEST!
Thread Starter
Join Date: Mar 2007
Location: Outer Space
Posts: 3,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: VQ35DE swap for S13
Bump
#3
SAY IT WITCHA CHEST!
Thread Starter
Join Date: Mar 2007
Location: Outer Space
Posts: 3,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: VQ35DE swap for S13
$2500 obo. Need this sold ASAP!
#4
Registered member
Join Date: Mar 2012
Location: Rocky Mount NC
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
R u willing to sell just the motor if so how much
#5
SAY IT WITCHA CHEST!
Thread Starter
Join Date: Mar 2007
Location: Outer Space
Posts: 3,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: VQ35DE swap for S13
Bringing this back from the dead. Swap is still for sale!
$2500 obo. No trades. Not separating anything.
$2500 obo. No trades. Not separating anything.
#6
SAY IT WITCHA CHEST!
Thread Starter
Join Date: Mar 2007
Location: Outer Space
Posts: 3,949
Likes: 0
Received 0 Likes
on
0 Posts
Re: VQ35DE swap for S13
Bump.
#7
Registered member
Join Date: Nov 2006
Location: chesapeake
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: VQ35DE swap for S13
Still have it?
Thread
Thread Starter
Forum
Replies
Last Post
mestep54
Engine / Exhaust / Drivetrain
1
07-14-2009 05:38 PM