Notices
Engine / Exhaust / Drivetrain Examples: Pistons, Mufflers, Transmission, etc.

turbo setup/Trade

Thread Tools
 
Old 12-27-2008, 01:46 PM
  #1  
Registered Member
Thread Starter
 
madracer's Avatar
 
Join Date: Sep 2008
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
madracer is an unknown quantity at this point
Smile turbo setup/Trade

--------------------------------------------------------------------------------

These is the items I have for trade:

1: T3 Turbo 45 trim .42 A/R Cold side .48 A/R Hot side
spools up from 2800 rpm on a stock B16A2 motor. (Used). in great working order..

2: T04E turbo T3/T4 57 trim .50 A/R Cold side .63 A/R Hot side, (Brand New) never used...

3: 1 set of great working DSM 450 Injectors still on the car.


4: I have a nice xspower intercooler in great shape still on the car...


5: Almost new Tial 38mm Wastegate used only for 200 miles still on the car...


6: Nice almost new TurboXS Manual boost controller still on the car...


7: I have 2 brand new Turbo manifold one is a Meutek and the other is a no name brand cast iron manifold, both will use a 38mm wastegate...never used....they both A/C compartable.....

8: Almost new Autometer Boost Guage, this guage have the Carbonfiber background...still on the car...

9: Real HKS SSQV BOV still in car and in great working order
I will include all piping i have for this setup...........

All these items is in great shape and working order.....

I will trade all this for a set of: Stage 2 Cams with springs/retainers and OBD1 injectors like in the 300's etc...
Reason for is that i'm going back to All motor...... injectors must be setup for the obd1 as my car is wired with a resistor box and i refuse to rewire the car....

You can call me 561-255-9958 or pm me.....
Thank you...
madracer is offline  




All times are GMT -8. The time now is 09:13 PM.