t28 GTiR FWD SR20 kit/part out rebuilt turbo Calum G20 ECU 370cc/manifold/ IC Setup
02-03-2009, 06:15 PM
#1
Registered Member
Thread Starter
Join Date: Feb 2003
Location: VA
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
t28 GTiR FWD SR20 kit/part out rebuilt turbo Calum G20 ECU 370cc/manifold/ IC Setup
have decided not to turbo my g20. It is a whole kit minus bov and fuel pump. The turbo is a fresh rebuild ! Will sell as kit or part out :biggthump
The ecu is for a b14/g20/s14 tuned by calum . The tune is for stock maf/370cc/t28gtir/stock fuel pressure/7800rpm/speed cut normal 370cc gtir setup.
I want to sell as whole 1500 shipped OBO or 1350 with out ecu . Will give few days to sell as kit but if not will part out. So make offers on kit or on parts anytime.
PM me or email at gonzoe00@hotmail.com
-t28 GTiR Rebuilt
-GTiR manifold
-GTiR Heat Shield
-GTiR turbo
-J-pipe
-2.5 custom Down Pipe
-370cc sr injectors in gold rail
-10 inch flex fan brand new
-5psi adjustable wastegate
-atp turbo 3 bolt 2" discharge adapter
-2 bolt intake pipe w/ 2.25 to 2.5 coupler
-all gaskets included
-oil feed with restrictor
-oil drain with 5/8NPT fitting
-coolant banjo to 3/8 barb hose
-coolant 6AN adapter and 3' braided hose
-GFD oil feed line
-F1 racing stage 2 Clutch brand new 250hp/250tq
-B14/any fwd t28 setup IC Setup 2.5 piping w/ T-bolt clamps,with Greddy Type flange
The ecu is for a b14/g20/s14 tuned by calum . The tune is for stock maf/370cc/t28gtir/stock fuel pressure/7800rpm/speed cut normal 370cc gtir setup.
I want to sell as whole 1500 shipped OBO or 1350 with out ecu . Will give few days to sell as kit but if not will part out. So make offers on kit or on parts anytime.
PM me or email at gonzoe00@hotmail.com
-t28 GTiR Rebuilt
-GTiR manifold
-GTiR Heat Shield
-GTiR turbo
-J-pipe
-2.5 custom Down Pipe
-370cc sr injectors in gold rail
-10 inch flex fan brand new
-5psi adjustable wastegate
-atp turbo 3 bolt 2" discharge adapter
-2 bolt intake pipe w/ 2.25 to 2.5 coupler
-all gaskets included
-oil feed with restrictor
-oil drain with 5/8NPT fitting
-coolant banjo to 3/8 barb hose
-coolant 6AN adapter and 3' braided hose
-GFD oil feed line
-F1 racing stage 2 Clutch brand new 250hp/250tq
-B14/any fwd t28 setup IC Setup 2.5 piping w/ T-bolt clamps,with Greddy Type flange
