Semi-built b16/b18c, pro1's, all bolt ons, and gsr transmission CHEAP!
#1
Registered member
Thread Starter
Join Date: Jun 2005
Posts: 6,447
Likes: 0
Received 0 Likes
on
0 Posts
Semi-built b16/b18c, pro1's, all bolt ons, and gsr transmission CHEAP!
Wally
Midlothian, VA 23112
$2,400 FIRM! (head alone is worth upwards of $1k) (now comes with bad ass hydro jdm gsr tranny)
Still in car, can hear run. Will be pulled by professional shop on my expense.
Dyno tuned at Adrenaline Autoworks
218whp/155lbtq
Tuned on Neptune, p28 ecu with jumper harness. Comes with obd2 itr ecu.
Bottom end:
GSR bottom end
acl race bearings (main and rod)
oem ctr pistons and rings
balanced crank
fresh hone and hot tanked block
new oil pump
new water pump
all new gaskets and seals
Head:
00 USDM B16
Milled .030
Mild port and polish on the intake side
Skunk2 pro series springs
Skunk2 pro1 cams
Skunk2 cam gears
Port matched ITR intake manifold
Port matched ITR Throttle body
New thermostat
New NGK wires
New NGK spark plugs
ITR Moon cut valve cover
STR Polished fuel rail
STR Polished cam plug
USDM ITR Injectors
Real Mugen Oil cap
All new gaskets and seals
3k miles on all new parts
Exhaust:
Hytec replica header
New o2 sensor
Transmission:Transmission:
JDM GSR LSD
Freshly rebuilt 3k miles ago with all new carbon syncros and new 3rd and 4th.
No grinds or pop outs whatsoever 100% mint(have vouches for this)
(will sell separately for $1k.)
Etc:
Password Whale penis intake
Midlothian, VA 23112
$2,400 FIRM! (head alone is worth upwards of $1k) (now comes with bad ass hydro jdm gsr tranny)
Still in car, can hear run. Will be pulled by professional shop on my expense.
Dyno tuned at Adrenaline Autoworks
218whp/155lbtq
Tuned on Neptune, p28 ecu with jumper harness. Comes with obd2 itr ecu.
Bottom end:
GSR bottom end
acl race bearings (main and rod)
oem ctr pistons and rings
balanced crank
fresh hone and hot tanked block
new oil pump
new water pump
all new gaskets and seals
Head:
00 USDM B16
Milled .030
Mild port and polish on the intake side
Skunk2 pro series springs
Skunk2 pro1 cams
Skunk2 cam gears
Port matched ITR intake manifold
Port matched ITR Throttle body
New thermostat
New NGK wires
New NGK spark plugs
ITR Moon cut valve cover
STR Polished fuel rail
STR Polished cam plug
USDM ITR Injectors
Real Mugen Oil cap
All new gaskets and seals
3k miles on all new parts
Exhaust:
Hytec replica header
New o2 sensor
Transmission:Transmission:
JDM GSR LSD
Freshly rebuilt 3k miles ago with all new carbon syncros and new 3rd and 4th.
No grinds or pop outs whatsoever 100% mint(have vouches for this)
(will sell separately for $1k.)
Etc:
Password Whale penis intake
Last edited by WALL-E; 09-24-2010 at 08:56 AM.
#2
Re: Semi-built b16/b18c, pro1's, all bolt ons, and gsr transmission CHEAP!
ever have any ground clearance problem with the hytec replica? Lots of nice parts, and pretty good numbers. goodluck!
#3
Registered member
Thread Starter
Join Date: Jun 2005
Posts: 6,447
Likes: 0
Received 0 Likes
on
0 Posts
Re: Semi-built b16/b18c, pro1's, all bolt ons, and gsr transmission CHEAP!
Ya, it was banged up when I got it from bottoming out. That and my car is stupid low.
Just selling because I found a boosted swap I can get for cheap!
Just selling because I found a boosted swap I can get for cheap!
#9
Registered User
Join Date: Mar 2005
Location: Virginia Beach
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Re: Semi-built b16/b18c, pro1's, all bolt ons, and gsr transmission CHEAP!
Good seller, very upfront with info and will work with ya. Good guy. I've driven car myself and it's a strong motor. Good luck with the sale Wall-E. Bump.