Rebuilt S14 SR20DET (FULL Swap)
#1
Rebuilt S14 SR20DET (FULL Swap)
Im selling my full S14 SR20DET swap (From MAF all the way to the driveshaft bolts). I have changed my plans and the first thing that has to go is the power plant. The motor has ran for about 4-5 hours in total and the car is currently a trailer queen.
The motor- The motor was rebuilt after the OEM blew up. The motor is running on a SOHC MAF so its running rich at this moment. Also, the front cover is seeping oil, I guess the FIPG didnt seal too well. It been in my garage for 2 months and hasnt left any stains, so its not a massive leak. All the machine work was done at Abacus Racing in Norfolk, VA.
-S14 SR20DET
-Bored .20 Over
-Cleaned and decked head
-JE Pistons
-OEM rods
-New Head
-Cosworth Headgasket
-ARP Headstuds
-ACL Race Bearings
-New front and rear main seals
-JDM aftermarket manifold (Got it used from Japan)
-T28 Turbo
-New exhaust gaskets
-FR sport Intake manifold Gasket/Spacer
-Lightweight H20 Pump Pulley
-Comes with accesories (alt, ps pump, starter)
-5 Speed tranny with grinds at all
-Modified fuse box that only has necessary fuses (Headlights, FP, etc)
Im looking to get $2400 OBO. was asking 2900. Reason for it being cheaper is that there is a problem with the wiring harness. We took the harness apart (previous owner hacked it up) I would recommend a new harness. Motor set is located in Gloucester, VA. PMs or texts/calls-804-815-5449.
Pics:
Old piston (bolt in combustion chamber damaged the piston and head, hence the new head)
Video of it running:
http://www.youtube.com/watch?v=yk2mqjKy9ss
The motor- The motor was rebuilt after the OEM blew up. The motor is running on a SOHC MAF so its running rich at this moment. Also, the front cover is seeping oil, I guess the FIPG didnt seal too well. It been in my garage for 2 months and hasnt left any stains, so its not a massive leak. All the machine work was done at Abacus Racing in Norfolk, VA.
-S14 SR20DET
-Bored .20 Over
-Cleaned and decked head
-JE Pistons
-OEM rods
-New Head
-Cosworth Headgasket
-ARP Headstuds
-ACL Race Bearings
-New front and rear main seals
-JDM aftermarket manifold (Got it used from Japan)
-T28 Turbo
-New exhaust gaskets
-FR sport Intake manifold Gasket/Spacer
-Lightweight H20 Pump Pulley
-Comes with accesories (alt, ps pump, starter)
-5 Speed tranny with grinds at all
-Modified fuse box that only has necessary fuses (Headlights, FP, etc)
Im looking to get $2400 OBO. was asking 2900. Reason for it being cheaper is that there is a problem with the wiring harness. We took the harness apart (previous owner hacked it up) I would recommend a new harness. Motor set is located in Gloucester, VA. PMs or texts/calls-804-815-5449.
Pics:
Old piston (bolt in combustion chamber damaged the piston and head, hence the new head)
Video of it running:
http://www.youtube.com/watch?v=yk2mqjKy9ss