Quality Turbo D16 SOHC Part-Out & Some
07-10-2013, 08:31 AM
#1
-Rep Legion
Thread Starter
Join Date: Apr 2008
Location: Norfolk
Posts: 6,609
Likes: 0
Received 0 Likes
on
0 Posts
Quality Turbo D16 SOHC Part-Out & Some
Location: Norfolk
Means of contact: 757-724-0442
I am not going to be finishing my what was supposed to be quick SOHC build just to get on the track. My directions have taken another route and therefor the part out is here. LOWBALLERS CAN KICK ROCKS, PARTS CAN SIT IN MY GARAGE FOREVER FOR ALL I CARE.
ALL PARTS ARE FOR A HONDA D16 MOTOR, USE ON OTHER APPLICATIONS AT YOUR OWN RISK!
The turbo kit made 441 @ 23lbs on the last set-up
Precision 5857 - Used but barely, journal bearing, V-band exhaust housing, ported shroud, .70 intake/.63 exhaust/58mm wheel, no play - $700
AFI custom manifold/downpipe/dumptube package - T3/44 manifold, 44mm dumptube, 5 bolt 2.5" downpipe (2.5" is better than 3" for single cams FYI) also has a flex pipe - SOLD
AFI/Garrett Intercooler - Mint condition, Good for ~600whp, backdoor for the turbo 2.5" in/out I'll get the measurments in a few - SOLD
AFI Intercooler piping - 2.5" Powdercoated black (from AFI) meant for the backdoor set-up in this post. So only upper charge pipe is included. Has a intake air temp sensor welded on the bottom side (can't see) Sensor included. Bead rolled ends. Tial 50mm BOV flange - SOLD
D16 Vitara 75mm with rings, wristpins, ect. Brand New - $125
D16 Eagle Rods - Brand new, ARP rod bolts and assembly lube included. - $270
D16 ACL Bearings - Race version, Brand new - $110
Brian Crower valve springs - Brand new, Part#:BC1070 - SOLD
Blox Stage 3 cam - Brand new - SOLD
Omni 3 bar map sensor - used but working condition - SOLD
D16 Skunk 2 Intake Manifold - Pro series, brand new with BNIB thermal TB gasket - $225
AEM fuel rail, AEM fuel pressure regulator, and Earls inline fuel filter already fitted to the rail, all brand new and all blue in color - $225 (will part out)
Chipped P75 crome OBD1 ECU - basemapped for a stock LS by Ramey built - $75
D16Y8 head - Stock, has everything besides intake manifold. Valves, springs, cam, gear, VTEC solenoid, & valve cover. - SOLD
Aluminum Radiator - Half size (stock 92-00 Civic) *PLUG & PLAY* An OEM Honda plug has been installed so no hardwiring is needed. Slim fan included. - $65
D16A6 Complete swap/longblock - Was told it runs, I didn't care though because I was going to build it. Still in same condition as when I was told this. Started removing some pieces to start the build but the head has not been touched, intake manifold, header, trans, dizzy, all removed but included. Milage unknown - $150
D16Y7 Longblock - Complete, jumped timing (during start up), don't know the condition of anything internally. May just need to be retimed and good to go? Don't know, don't care. - $75
D16Y8 Transmission - Pops out of 2nd sometimes, other than that I daily drove this trans for about a year. - $100
I am forgetting some pieces, and I also haven't posted some pieces on purpose... I have a 97 LX shell, 5 lug, NSX calipers GSR longblock, and plenty of other things... message me for details... not ready to fully post them up yet.
TRADES:
Open to whatever but, NO CAR AUDIO! NO GAME CONSOLES! NO PITBULLS! NO SKITTLES AND POCKET LINT!
**Pictures are slowly uploading from my phone, as they successfully upload, I will add them. Will be up today**
Means of contact: 757-724-0442
I am not going to be finishing my what was supposed to be quick SOHC build just to get on the track. My directions have taken another route and therefor the part out is here. LOWBALLERS CAN KICK ROCKS, PARTS CAN SIT IN MY GARAGE FOREVER FOR ALL I CARE.
ALL PARTS ARE FOR A HONDA D16 MOTOR, USE ON OTHER APPLICATIONS AT YOUR OWN RISK!
The turbo kit made 441 @ 23lbs on the last set-up
Precision 5857 - Used but barely, journal bearing, V-band exhaust housing, ported shroud, .70 intake/.63 exhaust/58mm wheel, no play - $700
AFI custom manifold/downpipe/dumptube package - T3/44 manifold, 44mm dumptube, 5 bolt 2.5" downpipe (2.5" is better than 3" for single cams FYI) also has a flex pipe - SOLD
AFI/Garrett Intercooler - Mint condition, Good for ~600whp, backdoor for the turbo 2.5" in/out I'll get the measurments in a few - SOLD
AFI Intercooler piping - 2.5" Powdercoated black (from AFI) meant for the backdoor set-up in this post. So only upper charge pipe is included. Has a intake air temp sensor welded on the bottom side (can't see) Sensor included. Bead rolled ends. Tial 50mm BOV flange - SOLD
D16 Vitara 75mm with rings, wristpins, ect. Brand New - $125
D16 Eagle Rods - Brand new, ARP rod bolts and assembly lube included. - $270
D16 ACL Bearings - Race version, Brand new - $110
Brian Crower valve springs - Brand new, Part#:BC1070 - SOLD
Blox Stage 3 cam - Brand new - SOLD
Omni 3 bar map sensor - used but working condition - SOLD
D16 Skunk 2 Intake Manifold - Pro series, brand new with BNIB thermal TB gasket - $225
AEM fuel rail, AEM fuel pressure regulator, and Earls inline fuel filter already fitted to the rail, all brand new and all blue in color - $225 (will part out)
Chipped P75 crome OBD1 ECU - basemapped for a stock LS by Ramey built - $75
D16Y8 head - Stock, has everything besides intake manifold. Valves, springs, cam, gear, VTEC solenoid, & valve cover. - SOLD
Aluminum Radiator - Half size (stock 92-00 Civic) *PLUG & PLAY* An OEM Honda plug has been installed so no hardwiring is needed. Slim fan included. - $65
D16A6 Complete swap/longblock - Was told it runs, I didn't care though because I was going to build it. Still in same condition as when I was told this. Started removing some pieces to start the build but the head has not been touched, intake manifold, header, trans, dizzy, all removed but included. Milage unknown - $150
D16Y7 Longblock - Complete, jumped timing (during start up), don't know the condition of anything internally. May just need to be retimed and good to go? Don't know, don't care. - $75
D16Y8 Transmission - Pops out of 2nd sometimes, other than that I daily drove this trans for about a year. - $100
I am forgetting some pieces, and I also haven't posted some pieces on purpose... I have a 97 LX shell, 5 lug, NSX calipers GSR longblock, and plenty of other things... message me for details... not ready to fully post them up yet.
TRADES:
Open to whatever but, NO CAR AUDIO! NO GAME CONSOLES! NO PITBULLS! NO SKITTLES AND POCKET LINT!
**Pictures are slowly uploading from my phone, as they successfully upload, I will add them. Will be up today**
Last edited by Broke B16; 07-23-2013 at 05:12 AM.
07-13-2013, 01:07 PM
#5
-Rep Legion
Thread Starter
Join Date: Apr 2008
Location: Norfolk
Posts: 6,609
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quality Turbo D16 SOHC Part-Out & Some
Sorry forgot that, XTD stage 4 brand new with pressure plate, alignment tool and throw out bearing. D15/D16/D17 application