Precision PT6765 Turbocharger
11-17-2011, 09:44 AM
#1
Registered Member
Thread Starter
Join Date: Jul 2011
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Precision PT6765 Turbocharger
Name: PT_killa
Location: Richmond
Means of contact: PM, reply here, or Text @ 443852213nine
Price: $460 FIRM
Description:
I have a used precision PT6765 journal bearing T4 turbo for sale $460 firm. The turbo has about 6000 miles on it. P trim turbine housing .68ar T4 in 3" vband out, S compressor housing 4in 2.5out. Very little left to right shaft play, no in and out shaft play (some left to right play is normal on journal bearings). The compressor seals may be blown because there is a small amount of oil leaking into my intake pipes and a little bit of smoke when I let off the gas under boost. However, it could also just be from too much oil pressure in the oil feed (not restricted enough on a 4an line) therefore a rebuild wouldn't be needed. If a rebuild is needed Precision will replace seals and bearings including labor for $189. Turbo is still on my daily driver in a remote setup @ 6psi and still boosts and spools fine but changing to a twin turbo setup, serious inquiries only, price $460 firm! email or text 443-852-213nine anytime
Pictures:
Location: Richmond
Means of contact: PM, reply here, or Text @ 443852213nine
Price: $460 FIRM
Description:
I have a used precision PT6765 journal bearing T4 turbo for sale $460 firm. The turbo has about 6000 miles on it. P trim turbine housing .68ar T4 in 3" vband out, S compressor housing 4in 2.5out. Very little left to right shaft play, no in and out shaft play (some left to right play is normal on journal bearings). The compressor seals may be blown because there is a small amount of oil leaking into my intake pipes and a little bit of smoke when I let off the gas under boost. However, it could also just be from too much oil pressure in the oil feed (not restricted enough on a 4an line) therefore a rebuild wouldn't be needed. If a rebuild is needed Precision will replace seals and bearings including labor for $189. Turbo is still on my daily driver in a remote setup @ 6psi and still boosts and spools fine but changing to a twin turbo setup, serious inquiries only, price $460 firm! email or text 443-852-213nine anytime
Pictures:
Last edited by pt_killa; 11-17-2011 at 10:05 AM.
Re: Precision PT6765 Turbocharger