Possible Parting out FULLY BUILT LSVTEC TURBO QUALITY PARTS tial, RC, RAMEY BUILT etc
#1
Registered Member
Thread Starter
Join Date: Jan 2006
Location: 757
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Possible Parting out FULLY BUILT LSVTEC TURBO QUALITY PARTS tial, RC, RAMEY BUILT etc
Name: Cory
Location: Va Beach
Means of contact: PM or (757) 270 1968
Cash talks ppl.. you show me cash prices may change. if you come to me with $4500-$5000 for engine trans and turbo kit with exhaust and ecu n harness... i would prolly do it...
Price: Not sure.. I mean its got like $4000 just in motor valve to oil pan... $3000 for Engine and trans sounds resonable. Will trade for different engine setup... k b etc.. all motor nice setups considerd.
Description: I think I want to part out my current lsvtec turbo.
Will sell whole swap with trans. turbo set up seperate, DO NOT ASK ABOUT SEPERATING HEAD AND BLOCK. I WILL SAY NO!! Motor and turbo setup is in my car now. Can/will demonstrate all working properly. with compression test. Can possibly remove parts to lower price of swap. Will come with harness and all sensors (COMPLETE)
COMPLETE SWAP
GSR TRANS. AMAZING. Act 6puck with lightweight fw.
MOTOR WILL COME WITH 550cc injectors
Stock Rail With A/N fittings
Adjustable FPR and -6 fuel line
Hondata Map Sensor
GSR valve cover With -10 welded bungs and all -10 lines
Edlebrock Victor X
Skunk 2 throttle body
Inline pro Gears
GSR cams
8mm wires
Vtec solinoid, tps sensor, all temp sensors, speed sensor, etc..
Hasport mounts
Block. LS
Cp Pistons
Eagle Rods
Arp Head and Mains
has golden eagle lsvtec kit
Head
B16 PR3-4 (not positive but deff pr3 b16.)
Skunk 2 valves (flat face) .5mm over
Dual Springs
Tit retainers
just resurfaced and flow tested by head shop in vb. everything is 100%
OBD2 distributor
TURBO SET UP. COMPLETE. *$3000* or Trade for a decent ALL MOTOR setup. NICE PARTS ALL HIGH DOLLAR!! Take that into account. if you offer me $1000 i will simply ignore you. If you were to buy piece by piece itd be about $5000 in parts.
HONDATA S300 with boost controller!
Tial 38mm (8.75 Small Green Spring)
New style TIAL bov
RAMEY built 3" charge piping
Precision Intercooler
1000Cc injectors RC
RLD Fab Ram Horn
New Precision 6262
3" v band down pipe
2" wastegate dump tube
All OIL LINES
Boost Gauge
All Couplers and tbolts
Will sell 3'' exhaust seperatly for $300. Full 3" to vibrant muffler. Made by Shaun at Ramey Built.
Pictures:
Location: Va Beach
Means of contact: PM or (757) 270 1968
Cash talks ppl.. you show me cash prices may change. if you come to me with $4500-$5000 for engine trans and turbo kit with exhaust and ecu n harness... i would prolly do it...
Price: Not sure.. I mean its got like $4000 just in motor valve to oil pan... $3000 for Engine and trans sounds resonable. Will trade for different engine setup... k b etc.. all motor nice setups considerd.
Description: I think I want to part out my current lsvtec turbo.
Will sell whole swap with trans. turbo set up seperate, DO NOT ASK ABOUT SEPERATING HEAD AND BLOCK. I WILL SAY NO!! Motor and turbo setup is in my car now. Can/will demonstrate all working properly. with compression test. Can possibly remove parts to lower price of swap. Will come with harness and all sensors (COMPLETE)
COMPLETE SWAP
GSR TRANS. AMAZING. Act 6puck with lightweight fw.
MOTOR WILL COME WITH 550cc injectors
Stock Rail With A/N fittings
Adjustable FPR and -6 fuel line
Hondata Map Sensor
GSR valve cover With -10 welded bungs and all -10 lines
Edlebrock Victor X
Skunk 2 throttle body
Inline pro Gears
GSR cams
8mm wires
Vtec solinoid, tps sensor, all temp sensors, speed sensor, etc..
Hasport mounts
Block. LS
Cp Pistons
Eagle Rods
Arp Head and Mains
has golden eagle lsvtec kit
Head
B16 PR3-4 (not positive but deff pr3 b16.)
Skunk 2 valves (flat face) .5mm over
Dual Springs
Tit retainers
just resurfaced and flow tested by head shop in vb. everything is 100%
OBD2 distributor
TURBO SET UP. COMPLETE. *$3000* or Trade for a decent ALL MOTOR setup. NICE PARTS ALL HIGH DOLLAR!! Take that into account. if you offer me $1000 i will simply ignore you. If you were to buy piece by piece itd be about $5000 in parts.
HONDATA S300 with boost controller!
Tial 38mm (8.75 Small Green Spring)
New style TIAL bov
RAMEY built 3" charge piping
Precision Intercooler
1000Cc injectors RC
RLD Fab Ram Horn
New Precision 6262
3" v band down pipe
2" wastegate dump tube
All OIL LINES
Boost Gauge
All Couplers and tbolts
Will sell 3'' exhaust seperatly for $300. Full 3" to vibrant muffler. Made by Shaun at Ramey Built.
Pictures:
Last edited by Crcale; 04-19-2011 at 07:30 PM.
#4
Registered member
Join Date: Oct 2007
Location: Louisa
Posts: 7,069
Likes: 0
Received 0 Likes
on
0 Posts
Re: Possible Parting out FULLY BUILT LSVTEC TURBO QUALITY PARTS tial, RC, RAMEY BUILT
Interested in some parts if you decide to part it out but it all depends on the price
#5
Registered Member
Thread Starter
Join Date: Jan 2006
Location: 757
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Re: Possible Parting out FULLY BUILT LSVTEC TURBO QUALITY PARTS tial, RC, RAMEY BUILT
Im going to let this marinade for a lil bit and well see how it pans out.. really dont wanna sell just want something that can be dailyied a lil easier...
#7
Registered member
Join Date: Oct 2007
Location: Louisa
Posts: 7,069
Likes: 0
Received 0 Likes
on
0 Posts
Re: Possible Parting out FULLY BUILT LSVTEC TURBO QUALITY PARTS tial, RC, RAMEY BUILT
Interested in the ramhorn mani, turbo oil lines, downpipe, and dumptube but as I said it all depends on the price of the parts. I know you probably don't want to part out but you can keep me in mind if you do decide to part.
#10
Registered member
Join Date: Aug 2009
Location: Winchester Va
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts