Kinugawa billet 25g 0miles DSM 500+HP super spool!
#1
RCKTMAN
Thread Starter
Join Date: Mar 2010
Location: New Kent
Posts: 2,673
Likes: 0
Received 0 Likes
on
0 Posts
Kinugawa billet 25g 0miles DSM 500+HP super spool!
Name: Casey
Location: central VA
Contact: 804-239-4047
Price: $700 shipped
Up for sale is a new Kinugawa 25g turbo with billet compressor wheel and ported DSM hotside. The turbine side is set up for an external wastegate on the o2 housing. Turbo was built by TurboAnything on DSMtuners. Ported 7cm turbine housing with TD06h4 wheel from an FP red. Center cartridge is MHI. Billet 11 blade Kinugawa compressor wheel, Kinugawa anti-surge compressor housing, Kinugawa upgraded thrust bearing kit. Compressor is 60mm x 78, turbine 58mm x 67. You should expect over 550hp with this. When the EVO guys upgrade their turbos, they use Kinugawa wheels, covers, and bearing kits. This company started with EVO performance. Their quality is second to none. They sell their stock exhaust housing, internally gated turbos for $850. The wheel/housing kits are less but those are just the billet wheel and anti-surge housing. They started expanding into 16g, normal rotation turbo frames a few years ago. Housing has been ported. This turbo setup has incredibly quick spool and will efficiently flow around 550hp. This will bolt up to stock or aftermarket DSM flanged manifold on eclipse and talon 4g63. It is water cooled. Check my threads for more high performance, high horsepower dsm parts. Trade for SN95 mustang parts.
Location: central VA
Contact: 804-239-4047
Price: $700 shipped
Up for sale is a new Kinugawa 25g turbo with billet compressor wheel and ported DSM hotside. The turbine side is set up for an external wastegate on the o2 housing. Turbo was built by TurboAnything on DSMtuners. Ported 7cm turbine housing with TD06h4 wheel from an FP red. Center cartridge is MHI. Billet 11 blade Kinugawa compressor wheel, Kinugawa anti-surge compressor housing, Kinugawa upgraded thrust bearing kit. Compressor is 60mm x 78, turbine 58mm x 67. You should expect over 550hp with this. When the EVO guys upgrade their turbos, they use Kinugawa wheels, covers, and bearing kits. This company started with EVO performance. Their quality is second to none. They sell their stock exhaust housing, internally gated turbos for $850. The wheel/housing kits are less but those are just the billet wheel and anti-surge housing. They started expanding into 16g, normal rotation turbo frames a few years ago. Housing has been ported. This turbo setup has incredibly quick spool and will efficiently flow around 550hp. This will bolt up to stock or aftermarket DSM flanged manifold on eclipse and talon 4g63. It is water cooled. Check my threads for more high performance, high horsepower dsm parts. Trade for SN95 mustang parts.
Last edited by caseyrock; 05-21-2013 at 06:37 AM.
#7
RCKTMAN
Thread Starter
Join Date: Mar 2010
Location: New Kent
Posts: 2,673
Likes: 0
Received 0 Likes
on
0 Posts
I know that Hahn Racecraft makes a 10cm T3 hotside that will fit this and Forced Performance might offer something as well. Ill knock off $100 if you don't want the turbine housing.