K24A2 complete built bottem end Cheapppppp need it gone ASAP
03-21-2011, 06:42 AM
#1
Registered Member
Thread Starter
Join Date: Dec 2010
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
K24A2 complete built bottem end Cheapppppp need it gone ASAP
Name: Ardy
Location: MD
Means of contact: 240-813-5404
Price: $650 or trade for some Honda wheels + cash on top
Description:
I have a k24a2 with eagle rods and wiseco 8.8.1 87.5M pistons. I bought the car and got fucked by this guy name Jason down in Richmond VA he said the car was 100% fine but all it needed was Kpro and a harness. so I do a compression test on the car and cyl # 1,2,3 are all 230psi and cyl #4 is 170psi. so i take the motor a part and see cyl # 4 has a spun rod bearing. all 4 pistons are fine, and 3 of the rods are fine as well. so all you need is one eagle rod and a bearing. you might also need to send the crank out. this is a very cheap block for what it is. there is nothing wrong with the cyl walls either.
Location: MD
Means of contact: 240-813-5404
Price: $650 or trade for some Honda wheels + cash on top
Description:
I have a k24a2 with eagle rods and wiseco 8.8.1 87.5M pistons. I bought the car and got fucked by this guy name Jason down in Richmond VA he said the car was 100% fine but all it needed was Kpro and a harness. so I do a compression test on the car and cyl # 1,2,3 are all 230psi and cyl #4 is 170psi. so i take the motor a part and see cyl # 4 has a spun rod bearing. all 4 pistons are fine, and 3 of the rods are fine as well. so all you need is one eagle rod and a bearing. you might also need to send the crank out. this is a very cheap block for what it is. there is nothing wrong with the cyl walls either.
