honda d16z6 swap
#1
honda d16z6 swap
d16z6 motor si cable 5spd trans axles shift linkage no wireharness the block was fine new oem rings & bearings used the old rods & pistons new oem oilpump new gaskets & seals new one water pump the
head was good so didn't do anything to it motor had 90k on it when the work was to it $500 obo text thanks robert
head was good so didn't do anything to it motor had 90k on it when the work was to it $500 obo text thanks robert
Last edited by gtr34; 04-09-2010 at 02:03 AM.
#9
#10
Registered Member
Join Date: Jul 2009
Location: Culpeper
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
Re: honda d16z6 swap
sounds like some b/s to me like the motor i just put in dude said it was perfect . and yup it was miss cylinder number 2's piston rod . So what people want to know and it should be easy or you to find out since " your friend who works for honda " rebuilt it . Is .
what machine shop was used what was the bore? std hone or oversized . what rings were used OEM or after market and what pistons ,rods, bearings, valves, valve guides, vavle seals were used was the oil pump replaced? these are the type of things anyone who is accosiated with engines and rebuilding will know . considering all of the blueprinting that is needed when rebuilding an engine .
what machine shop was used what was the bore? std hone or oversized . what rings were used OEM or after market and what pistons ,rods, bearings, valves, valve guides, vavle seals were used was the oil pump replaced? these are the type of things anyone who is accosiated with engines and rebuilding will know . considering all of the blueprinting that is needed when rebuilding an engine .