H22 part out
02-10-2014, 08:18 PM
#1
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
H22 part out
Name: Stephen
Location: Gloucester/Newport News
Means of contact: Text/Call 757-303-2823 or 804-832-8037 leave message if no answer
Price: $ See below or trade eg hatch parts
Description: H22a4 out of a 97 prelude 130,xxx miles
Head - Good no problems has new cam seals installed less than 3000 miles ago. No dizzy. Single plug JDM vtec solenoid (needs gasket). Comes with valve cover, cams and gears. -$350 obo price drop $275obo
Bottom End- possible #2 wrist pin slap, may need rods and pistons. Comes with JDM H23 vtec oil pump, with no crank sensor attachment, factory aluminum oil pan, H23 blue top hydro timing belt set up rod bearings were pulled loose to inspect a noise and showed little wear for the millage. Crank has no marks whatsoever. Harmonic balancer single belt. Ran when pulled out but made bottom end noise over 2500 rpm. Will sell as a whole or part out just make an offer.
SOLD FROM BOTTOM END: crank, timing setup, oil pump, harmonic balancer
I also have H23 blue top intake mani. All sensors and some wire harness pig tails. Same condition as it came from tiger Japanese off a motor that I didn't use. -$ SOLD
complete stock air box from inside front bumper to throttle body- make offer
Pictures:
Location: Gloucester/Newport News
Means of contact: Text/Call 757-303-2823 or 804-832-8037 leave message if no answer
Price: $ See below or trade eg hatch parts
Description: H22a4 out of a 97 prelude 130,xxx miles
Head - Good no problems has new cam seals installed less than 3000 miles ago. No dizzy. Single plug JDM vtec solenoid (needs gasket). Comes with valve cover, cams and gears. -$350 obo price drop $275obo
Bottom End- possible #2 wrist pin slap, may need rods and pistons. Comes with JDM H23 vtec oil pump, with no crank sensor attachment, factory aluminum oil pan, H23 blue top hydro timing belt set up rod bearings were pulled loose to inspect a noise and showed little wear for the millage. Crank has no marks whatsoever. Harmonic balancer single belt. Ran when pulled out but made bottom end noise over 2500 rpm. Will sell as a whole or part out just make an offer.
SOLD FROM BOTTOM END: crank, timing setup, oil pump, harmonic balancer
I also have H23 blue top intake mani. All sensors and some wire harness pig tails. Same condition as it came from tiger Japanese off a motor that I didn't use. -$ SOLD
complete stock air box from inside front bumper to throttle body- make offer
Pictures:
Last edited by stebon; 02-20-2014 at 02:23 PM. Reason: SOME ITEMS SOLD
02-17-2014, 04:19 PM
#6
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 part out
come on people help me make some room in the garage, prices are obo. just make an offer worst i can say is no. also open to trades. d and b series parts, mid-late 80s s-10, chevy small block stuff....