Garage Clean out! Lots of D-series, B20 block, b16 block and crank.
#1
Registered member
Thread Starter
Garage Clean out! Lots of D-series, B20 block, b16 block and crank.
Name: Brian
Location: Richmond
Means of contact: pm or text 804-380-7064
Description: Cleaning out my garage, and I am selling lots of parts from my previous build. Prices are OBO, but no lowballing...
D16z6 intake manifold bare: $30
D16z6 intake manifold, throttle body and all sensors minus purge solenoid, comes with fuel rail and injectors: $75
D16a6 intake manifold with throttle body and all sensors minus iacv, iat and fuel lines: $50
(2) D16z6 valve cover $25 each, one still painted and one without paint, both with same logo as pictured
D16a6 motor mounts, driver, passenger and front: $5 each
DC header for d16, needs a flange for the cat welded on: $10
OBD0 injector resistor box: $20
CRX si front crossmember: $30
CRX si taillights and center piece: $25 each
B20 block with crankshaft and main caps, needs bore: sold
B16 block bare, needs hone at minimum: sold
B16 crank, micropolished and balanced, still in bag in my room: sold
DC header for d16
Bisimoto Stage 2 Cam for d16z6, brand new it was only removed at the machine shop to measure the lobe, and I went with a Crower instead: $350, it sells for $350 from Bisi and considering it is brand new and you would not be paying for shipping, you're still making it out, but make me an offer and I will consider it.
Testing Waters: I'm thinking about selling a pair of jdm Stanley foglights for a CRX I bought over the summer. They have everything with them-jdm mounts, wiring harness with relay, switch. I'm not sure whether I want to sell these so make an offer and I will consider it.
Pictures:
cam
d16a6
d16z6with some sensors
d16z6 bare
Again, prices are OBO but pllease be reasonable, I paid money for all of these parts and would like consideration for that. Pick up is preferred, but I can ship if you request. I go to VMI and I am going to have to go home on weekends just to get the parts to you, so shipping is a little harder for me..
Location: Richmond
Means of contact: pm or text 804-380-7064
Description: Cleaning out my garage, and I am selling lots of parts from my previous build. Prices are OBO, but no lowballing...
D16z6 intake manifold bare: $30
D16z6 intake manifold, throttle body and all sensors minus purge solenoid, comes with fuel rail and injectors: $75
D16a6 intake manifold with throttle body and all sensors minus iacv, iat and fuel lines: $50
(2) D16z6 valve cover $25 each, one still painted and one without paint, both with same logo as pictured
D16a6 motor mounts, driver, passenger and front: $5 each
DC header for d16, needs a flange for the cat welded on: $10
OBD0 injector resistor box: $20
CRX si front crossmember: $30
CRX si taillights and center piece: $25 each
B20 block with crankshaft and main caps, needs bore: sold
B16 block bare, needs hone at minimum: sold
B16 crank, micropolished and balanced, still in bag in my room: sold
DC header for d16
Bisimoto Stage 2 Cam for d16z6, brand new it was only removed at the machine shop to measure the lobe, and I went with a Crower instead: $350, it sells for $350 from Bisi and considering it is brand new and you would not be paying for shipping, you're still making it out, but make me an offer and I will consider it.
Testing Waters: I'm thinking about selling a pair of jdm Stanley foglights for a CRX I bought over the summer. They have everything with them-jdm mounts, wiring harness with relay, switch. I'm not sure whether I want to sell these so make an offer and I will consider it.
Pictures:
cam
d16a6
d16z6with some sensors
d16z6 bare
Again, prices are OBO but pllease be reasonable, I paid money for all of these parts and would like consideration for that. Pick up is preferred, but I can ship if you request. I go to VMI and I am going to have to go home on weekends just to get the parts to you, so shipping is a little harder for me..
Last edited by REXsi90; 03-17-2012 at 08:11 AM. Reason: sold stuff, added more, fixed phone #